Paxar MPCL II manual Chapter, Using ROM Fonts

Chapter 2. Using ROM Fonts

This chapter describes

how to use ANSI characters with ROM fonts.

the available ROM fonts.

ordering information for additional ROM fonts.

Optional fonts are available in one of several ROM sets.

Refer to the following tables to locate the style for your chosen font.

Fonts 1-6 and 12 use the ANSI character set. Fonts 7-11 use the non-standard character sets shown in Appendix A, "Character Sets."

Point sizes are approximate. A 12-point character is 12 points wide. There are 72 points to an inch, so there would be six 12-point characters to an inch. Use these point sizes to determine which fonts will fit on your format.

The quality of your printed fonts is affected by print speed, head energy, and the quality of your stock. To maximize the quality of printing, you may wish to use a premium quality stock. Contact your Monarch Sales Representative for information about "premium" supplies. To improve the appearance of your fonts, slow down the print speed. Refer to your MPCLII Packet Reference Manaul to adjust the print speed.

nCheck your bar codes when you change your print speed to ensure an in-specification bar code.

2-1