|
|
C A R E & | 3 |
M A I N T E N A N C E |
|
|
This chapter explains how to
♦clean the printhead, platen roller, and supply sensors
♦clear label jams.
Caution: Do not touch the printhead with your fingers. The printhead may be hot after printing and may burn you. Wait until the printhead is cool before cleaning.
Do not use sharp objects around the printhead. This may damage the printhead and require a service charge.
C l e a n i n g
Your printing rate and frequency determines how often you must clean the printer.
You may need to clean the printhead and platen roller
♦after using seven to ten
♦in extreme temperatures, humid conditions or a dirty environment
♦when you see voids in the print as shown
♦after a label jam.
You may have to clean the supply sensors more often if you receive supply error messages frequently.
Care & Maintenance