Paxar Monarch 7411 setup guide Press Enter/Pause. You will see

3. Press Enter/Pause to select the internal port. After setting the port to

	internal, change the mode to enable bi-directional communications.
4.	Press		or until you see
		PARALLEL COMM
			Mode
5. Press Enter/Pause. You will see
		MODE
			Compatible
6.
	Press		to display the other option, IEEE1284, and press Enter/Pause.
	This selects IEEE1284 for bi-directional Ethernet communications.
	(Compatible mode is used with a computer connection and a parallel
	cable.)		Set the Port to “External” if you want to use the parallel port.

Note: Turn the printer off and back on after changing the parallel port communications mode so the printer can initialize with the new port setting.

Antenna

Test Button

(not all models have a Test button) Ethernet Port

Parallel Port

Serial Port

2