3Com 16 Plus manual Stacking the Units Together, Rubber Feet, Stacking Clip

Page 11

Stacking the Units Together

The Rubber Feet

The four self-adhesive rubber feet prevent your switch from moving around on your desk. Only stick the feet to the marked areas at each corner of the underside of your switch if you intend to place the unit directly on top of the desk. Do not fix the feet if you are going to use the clip.

The Stacking Clip

The stacking clip allows you to stack your OfficeConnect units together neatly and securely.

CAUTION: You can stack up to a maximum of four units. Smaller units must be stacked above larger units.

To fit the clip:

1Place your unit on a flat surface.

2Fit the clip across the top of the unit, as shown in Figure 3 (picture 1), ensuring that the longer sections of the fastening pieces are pointing downwards.

3Align the fastening pieces over the slots found on each side of the unit.

4Push the clip down gently to secure it, ensuring the fastening pieces snap into the slots on the unit.

To fit another unit:

1Rest the second unit on top of the clip and align it with the front of the unit below.

2Press down gently on the unit to secure it onto the clip, ensuring the fastening pieces fit into the slots on the unit below, as shown in Figure 3 (picture 2).

Figure 3 Stacking Your Units Together

1

Fastening

2

 

 

 

Piece

 

 

 

Fastening

 

 

Piece

To remove the clip:

1Remove the top unit together with the clip. If you hook a finger around one of the the fastening pieces and then pull it gently from out of the slot, the clip should come away with the upper unit attached to it.

2Push the clip in the center, so it bends towards the base of the unit, and then separate once the clip is loose.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OfficeConnect 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Technical Support Introduction Creating Your Network Dual Speed Switch 5 plus-FrontDual Speed Switch 8 plus-Front Dual Speed Switch 16 plus-Front Power Adapter socket Dual Speed Switch 16 plus-RearSwitching How the Switch Can Be UsedUnit Connections Connecting 10BASE-T and 100BASE-TX NetworksBefore You start Twisted Pair TP CablesStacking Clip Stacking the Units TogetherRubber Feet Securing Your Switch Positioning Your SwitchConnecting OfficeConnect Units to Your Switch Connecting Workstations and Other Equipment to Your SwitchSpot Checks Checking Unit ConnectionsProblem Solving Page Networking Terminology Page Dimensions and Operating Conditions Standards Dimensions and StandardsEnvironmental Statement about the Documentation Environmental StatementsEnd Of Life Statement Regulated Materials StatementImportant Safety Information Wichtige Sicherheitshinweise Consignes Importantes DE Sécurité World Wide Web Site Online Technical Services3Com Knowledgebase Web Services Technical SupportSupport from 3Com Support from Your Network SupplierEurope, Middle East Africa Country Telephone Number Fax Number Returning Products for Repair3Com Corporation Limited Warranty Warranties Exclusive Regulatory Notices Page Part No. DUA1679-0AAA03 Published July

16 Plus specifications

The 3Com 16 Plus was a groundbreaking networking device widely recognized for its performance and reliability in the early days of computer networking. Launched in the 1990s, the device played a pivotal role in advancing Ethernet networking technology and facilitating connectivity between multiple devices in local area networks (LANs).

One of the primary features of the 3Com 16 Plus was its ability to support 16 ports, which allowed for a considerable number of devices to connect simultaneously. This scalability made it suitable for small to medium-sized businesses, as well as educational institutions looking to expand their networking capabilities without requiring extensive infrastructure investment. The ports typically supported 10BASE-T (Ethernet) and 100BASE-TX (Fast Ethernet) technologies, enabling a range of data transfer speeds that catered to different networking needs.

The 3Com 16 Plus utilized a non-blocking switching architecture, which ensured that data packets could be transmitted without delay, leading to enhanced overall network performance. This was particularly significant for environments that demanded high bandwidth, as it minimized packet loss and improved the efficiency of data transmission between connected devices.

Another key characteristic of the 3Com 16 Plus was its plug-and-play capability. This feature facilitated easy installation, requiring minimal configuration for users. The device automatically detected connected hardware, allowing businesses to focus on productivity instead of navigating complex setup processes. The inclusion of automatic address learning also streamlined network management, as the switch could learn and remember device addresses without manual input.

In addition to its hardware capabilities, the 3Com 16 Plus was complemented by robust software utilities that provided network monitoring and management features. These tools enabled administrators to monitor device performance, track bandwidth usage, and troubleshoot connectivity issues effectively.

The 3Com 16 Plus also prioritized reliability, with features such as power redundancy and enhanced thermal management, ensuring continuous operation even under demanding conditions. Its durable construction assured clients of longevity, which was essential for those investing in networking solutions at the time.

In conclusion, the 3Com 16 Plus was a vital asset in the evolution of networking technology. Its 16-port design, support for Ethernet and Fast Ethernet, non-blocking architecture, plug-and-play capability, and robust management tools made it a favored choice in its era. Businesses and educational institutions benefited from its ability to create efficient, reliable, and scalable networks, laying the groundwork for the advanced networking standards we see today.
Top Page Image Contents