3Com 16 Plus manual Positioning Your Switch, Securing Your Switch

Page 12

Positioning Your Switch

When installing your Switch, ensure:

■It is out of direct sunlight and away from sources of heat.

■Cabling is away from power lines, fluorescent lighting fixtures, and sources of electrical noise such as radios, transmitters and broadband amplifiers.

■Water or moisture cannot enter the case of the unit.

■Air flow around the unit and through the vents in the side of the case is not restricted. We recommend you provide a minimum of 25mm (1in.) clearance.

Securing Your Switch

There are two slots on the underside of the OfficeConnect Switch that can be used for wall mounting. It is recommended that you mount the Switch with the LEDs facing upwards to prevent dust entering the cooling vents.

When wall mounting the unit, ensure that it is within reach of the power outlet.

You need two suitable screws. Ensure that the wall you are going to use is smooth, flat, dry and sturdy. Make two screw holes which are 150mm (5.9in.) apart for Switch 5 plus and Switch 8 plus, or 142mm (5.6in.) apart for Switch 16 plus. Use the guide on page 30 and 31 to mark the position of the holes. Fix the screws into the wall, leaving their heads 3mm (0.12in.) clear of the wall surface.

Remove any connections to the unit and locate it over the screw heads. When in line, gently push the unit on to the wall and move it downwards to secure. When making connections, be careful not to push the unit up and off the wall.

CAUTION: Only wall mount single units, do not wall mount stacked units.

Also available from 3Com, is the OfficeConnect Mounting Unit (part number 3C16765). This allows you to firmly secure a stack of OfficeConnect devices to the desktop or onto a shelf in a rack.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OfficeConnect 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Technical Support Introduction Dual Speed Switch 5 plus-Front Creating Your NetworkDual Speed Switch 8 plus-Front Dual Speed Switch 16 plus-Front Dual Speed Switch 16 plus-Rear Power Adapter socketHow the Switch Can Be Used SwitchingConnecting 10BASE-T and 100BASE-TX Networks Before You startTwisted Pair TP Cables Unit ConnectionsStacking the Units Together Rubber FeetStacking Clip Positioning Your Switch Securing Your SwitchConnecting Workstations and Other Equipment to Your Switch Connecting OfficeConnect Units to Your SwitchChecking Unit Connections Spot ChecksProblem Solving Page Networking Terminology Page Dimensions and Standards Dimensions and Operating Conditions StandardsEnvironmental Statements End Of Life StatementRegulated Materials Statement Environmental Statement about the DocumentationImportant Safety Information Wichtige Sicherheitshinweise Consignes Importantes DE Sécurité Online Technical Services 3Com Knowledgebase Web ServicesTechnical Support World Wide Web SiteSupport from Your Network Supplier Support from 3ComEurope, Middle East Africa Returning Products for Repair Country Telephone Number Fax Number3Com Corporation Limited Warranty Warranties Exclusive Regulatory Notices Page Part No. DUA1679-0AAA03 Published July

16 Plus specifications

The 3Com 16 Plus was a groundbreaking networking device widely recognized for its performance and reliability in the early days of computer networking. Launched in the 1990s, the device played a pivotal role in advancing Ethernet networking technology and facilitating connectivity between multiple devices in local area networks (LANs).

One of the primary features of the 3Com 16 Plus was its ability to support 16 ports, which allowed for a considerable number of devices to connect simultaneously. This scalability made it suitable for small to medium-sized businesses, as well as educational institutions looking to expand their networking capabilities without requiring extensive infrastructure investment. The ports typically supported 10BASE-T (Ethernet) and 100BASE-TX (Fast Ethernet) technologies, enabling a range of data transfer speeds that catered to different networking needs.

The 3Com 16 Plus utilized a non-blocking switching architecture, which ensured that data packets could be transmitted without delay, leading to enhanced overall network performance. This was particularly significant for environments that demanded high bandwidth, as it minimized packet loss and improved the efficiency of data transmission between connected devices.

Another key characteristic of the 3Com 16 Plus was its plug-and-play capability. This feature facilitated easy installation, requiring minimal configuration for users. The device automatically detected connected hardware, allowing businesses to focus on productivity instead of navigating complex setup processes. The inclusion of automatic address learning also streamlined network management, as the switch could learn and remember device addresses without manual input.

In addition to its hardware capabilities, the 3Com 16 Plus was complemented by robust software utilities that provided network monitoring and management features. These tools enabled administrators to monitor device performance, track bandwidth usage, and troubleshoot connectivity issues effectively.

The 3Com 16 Plus also prioritized reliability, with features such as power redundancy and enhanced thermal management, ensuring continuous operation even under demanding conditions. Its durable construction assured clients of longevity, which was essential for those investing in networking solutions at the time.

In conclusion, the 3Com 16 Plus was a vital asset in the evolution of networking technology. Its 16-port design, support for Ethernet and Fast Ethernet, non-blocking architecture, plug-and-play capability, and robust management tools made it a favored choice in its era. Businesses and educational institutions benefited from its ability to create efficient, reliable, and scalable networks, laying the groundwork for the advanced networking standards we see today.
Top Page Image Contents