3Com LANplex 6000 manual Token Ring Switching Module Installation Guide

Page 1

R

TOKEN RING SWITCHING

MODULE INSTALLATION GUIDE

For the LANplex 6000

About This Guide This guide includes:

An inventory of items shipped with your LANplex 6000 module

An overview of the Token Ring Switching Module (TRSM)

Instructions for installing and replacing TRSM

A description of the TRSM’s components, including media options and diagnostic LEDs

Pin-out information for the TRSM

Information on installing modules is also included in the LANplex 6000 Getting Started guide.

NOTE: Prior to installing the TRSM module, LANplex system software revision 6.0 or later must be installed.

CAUTION: In order to run software revision 5.0 or later on the LANplex 6000 you must have the new LMM Plus installed in your system. To verify if you have an LMM Plus installed check the module’s ejector tab to ensure it says LMM+.

Audience This guide is intended for trained technical personnel only.

Taking Inventory Your package should contain the following items.

1 LANplex 6000 TRSM

1 LANplex 6000 Software Release Notes

1 disposable electrostatic discharge (ESD) wrist strap

Operational diskette(s) (UNIX and DOS)

MIB diskette(s) (UNIX and DOS)

Contact 3Com Customer Service Organization at 1-800-876-3266, option 2, if any item is missing.

Image 1
Contents Token Ring Switching Module Installation Guide Trsm Description Source Routing SR Getting Started guide LANplex 6004 with Blank Faceplates Handles in Outward Position Ground Symbol for Static Discharge Guiding an Trsm Module into a LANplex Trsm Handles in Inward Inject Position Trsm Installation Trsm Diagnostic procedure RX+ LANplex 6000 Planning Your Site 3Com Corporation Bayfront Pla a Santa Clara, California 5052