The figures below show the mounting bracket being mounted to a wall, and then a cable being routed through the large opening on the back of the mounting bracket.
Cradle
Installing the mounting bracket | Routing a cable |
4Connect the Ethernet cable (and power cable, if applicable) to the port(s) on the front of the access point.
5Snap the access point onto the mounting bracket.
To install the locking bar, push the locking bar through the opening in the side of the mounting bracket until the hole on the locking bar is exposed. Insert a lock (not provided) through the hole on the locking bar, and then close the lock to secure it in place.
.11a 
.11g .100 .10
|
| 100 | 10 |
| 11g |
| . |
11a | . |
| |
. |
|
| |
. |
|
|
|
Inserting the locking bar | Securing the bar with a lock |