6 Checking the LED Indicators
When the access point is connected to power, LEDs indicate activity as follows (solid LED indicates connection; blinking LED indicates activity):
POWER | 11a | 11b/g | 100 | 10 |
| LED | Color | Indicates |
|
|
|
|
| Power | Green | The access point is powered up |
|
|
| and operating normally. |
|
| Off | The access point is not receiving |
|
|
| power or there is a fault with the |
|
|
| power supply. |
|
|
|
|
| 11a | Green | The access point has WLAN |
|
|
| frame transmission over the |
|
|
| 802.11a 5.3 GHz radio band. |
|
| Off | No link is present. |
|
|
|
|
| 11b/g | Green | The access point has WLAN |
|
|
| frame transmission over the |
|
|
| 802.11b/g 2.4 GHz radio band. |
|
| Off | No link is present. |
|
|
|
|
100 | Green | The access point has a 100 Mbps | |
|
|
| Fast Ethernet connection. |
|
| Off | No link is present. |
|
|
|
|
10 | Green | The access point has a 10 Mbps | |
|
|
| Ethernet connection. |
|
| Off | No link is present. |
Troubleshooting
Refer to the Mobility System Configuration Guide or to the 3Com Wireless LAN Switch Reference Manual to obtain the access point status.
Copyright © 2006 3Com Corporation. All rights reserved. 3Com and the 3Com logo are registered trademarks of 3Com Corporation. All other company and product names may be trademarks of the respective companies with which they are associated.
Part Number 10015413 Rev. AA
Published July 2006