3Com 1000BASE-SX quick start

Page 5

2-Port 1000BASE-SX and 2-Port 1000BASE-LX Gigabit Ethernet Interface Modules Quick Start Guide

5

If the listed contents are not in the shipping box, contact your supplier.

All shipping boxes are reusable. After you remove the contents, replace the packing materials in the box and store it for future use.

4Remove the GEN Interface Module from its antistatic bag and inspect it for physical damage.

CAUTION: Handle the module by the front panel only. Do not touch any components, pins, leads, or solder connections.

If the module appears to be damaged, replace it in its antistatic bag and shipping box, and contact your supplier.

Installation Before you install a GEN Interface Module, make sure that the Prerequisites CoreBuilder 9000 chassis is properly installed in a rack, on a table, or

on a shelf, according to the instructions in the CoreBuilder 9000 Enterprise Switch Getting Started Guide and the 16-Slot Chassis Quick Installation Guide or 7-Slot Chassis Quick Installation Guide.

You need a flat-blade screwdriver to complete the module installation.

Image 5
Contents For the CoreBuilder 9000 Enterprise Switch Ejector handle Front Panels of the GEN Interface ModulesFDA Class 1 Laser Device ESD Safety Information Page Page Page By this module Reserved for an SFM Not applicable By this moduleReserved for an SFM Not applicable Interface Module Spring-loaded Screws GEN Interface ModuleInterface Module Spring-loaded ScrewPage Link is disabled or port is not cabled Port is cabled but the switch fabricPort is receiving or transmitting PacketsConnect slot.1 1000BASE-LX 3CB9LG2SC Module Cabling Requirements 1000BASE-SX 3CB9LG2MC Module Cabling RequirementsUp to 500 m 1,640 ft Up to 550 m 1,804 ftPower Specifications Physical SpecificationsEnvironmental Requirements Regulatory ComplianceRelated CoreBuilder Documents Page Page Software Year 2000 WarrantyHardware Warranties Exclusive Obtaining Warranty ServiceLimitation of Liability DisclaimerLOW Voltage Directive Statement Emissions Compliance Statements for Class a ProductsEMC Directive Statement Australian EMC Frameworks Statement General Approval Statement for UK
Related manuals
Manual 12 pages 20.15 Kb

1000BASE-SX specifications

The 3Com 1000BASE-SX is a pivotal technology in the fiber-optic networking landscape, offering high-speed data transfer capabilities that cater to various networking needs. As part of the Gigabit Ethernet standards set by IEEE 802.3, 1000BASE-SX is specifically designed for short-range applications, typically within local area networks (LANs). It utilizes multimode fiber optic cables to deliver data at speeds of up to 1 Gbps, making it ideal for environments that require efficient and fast data exchange.

One of the main features of 3Com 1000BASE-SX is its reliance on multimode fiber optic cables, which allows for the transmission of light signals with multiple paths, effectively enhancing bandwidth and distance capabilities. This technology supports distance ranges of up to 550 meters on OM2 multimode fiber and up to 300 meters on OM1 fiber, making it suitable for office buildings or campuses where networking equipment is located relatively close to one another. Given its limited range, 1000BASE-SX is best utilized in scenarios where high performance is necessary without the requirements for long-distance connections.

Another significant characteristic of the 3Com 1000BASE-SX technology is its wavelength. Operating at an 850 nm wavelength, the system utilizes vertical-cavity surface-emitting lasers (VCSELs) as a light source. VCSEL technology is favored for its efficiency and ability to provide low-cost, high-density connections, which aligns with the growing demand for robust networking solutions in modern enterprise environments.

In terms of compatibility and ease of integration, 3Com 1000BASE-SX interfaces seamlessly with Ethernet standards while also supporting various switching technologies. This versatility facilitates both the upgrade of existing networks and the construction of new, high-performance network infrastructures. Furthermore, it is backward-compatible with older Ethernet standards, allowing organizations to gradually transition to Gigabit Ethernet without the need for extensive infrastructure overhauls.

Lastly, 3Com’s adherence to industry standards ensures reliability and performance consistency across devices manufactured by different vendors, promoting interoperability. With an increasing reliance on data and the necessity for faster networking solutions, the 3Com 1000BASE-SX remains a significant choice for enterprises striving for efficiency in data traffic management and enhancing their overall network capabilities. Whether for corporate offices, educational institutions, or data centers, 3Com 1000BASE-SX offers a robust solution for the challenges of modern networking complexities.