Rosewill RNWA-PoE-100 user manual Connecting the PoE Injector, Chapter

Page 7

PoE Injector RNWA-PoE-100

User Manual

 

 

 

Chapter 3

Chapter 3 Connecting the PoE Injector

You can use RNWA-PoE-100 PoE Injector with PD or PoE Splitter to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.

The following steps will tell you how to connect the PoE Injector correctly.

1.Use a CAT5 UTP cable to connect port of Ethernet device (such as a switch, hub or router) to the LAN IN port.

2.Please connect the power adapter properly to a power socket with provided power cable, and then connect the other end of the power adapter to the DC 48V port of the RNWA-PoE-100.

3.Connect the POWER+DATA OUT port of the RNWA-PoE-100 to a PD or a PoE Splitter with CAT 5 UTP cable.

Now, the device can work normally with data and power.

Here are some setup examples for the PoE Injector:

PoE Injector with the devices that support PoE:

6

Image 7
Contents User Manual PoE Injector RNWA-PoE-100CE Mark Warning FCC STATEMENTCHAPTER 2 EXTERNAL COMPONENT………………………………………………..5 Table of ContentCHAPTER 3 CONNECTING THE POE INJECTOR……………………………………6 CHAPTER 1 OVERVIEWChapter 1.1 Package ContentChapter 1 Overview 1.3 Product Specification Normal 1.2 FeaturesEnvironmental and Physical Chapter 2 External Component 2.1 Hardware Diagram Chapter 3 Connecting the PoE Injector 3.1 Wired Setup Rosewill Support techsupport@rosewill.com 3.2 Wireless SetupLet us know Call Center