User Manual | ||
|
|
|
|
|
|
For Existing Windows 98/98 SE Systems
1.After the Serial ATA PCI Host Adapter and attached drives are configured, boot up Windows.
2.At the Add New Hardware Wizard, click Next.
3.Select Search for the best driver for your device option and then click Next.
4.Insert the Driver CD, check Specify a location, uncheck the other boxes, and click Browse.
5.Points specify a location, example E:\SATA
6.Click Next and then Finish respectively.
2.2. Windows ME Driver Installation
For New Windows ME Systems
1.After the Serial ATA PCI Host Adapter and attached drives are configured, follow Microsoft procedures to install Windows accordingly.
2.Once Windows has been installed, click My Computer, then click Properties. Click Device Manager tab.
3.Double click Other Devices then PCI RAID Controller.
4.Click Driver tab, then Update Driver.
5.Insert the Driver CD, check Specify the location of the driver (Advanced) and click Next.
6.Select Search for the better driver option, check Specify a location, uncheck Removable Media, type in E:\ (If your
7.Points specify a location, example E:\SATA
8.Click Next and then Finish.
9.Remove the Driver diskette and click Yes to restart Windows to complete driver installation.
For Existing Windows ME Systems
1.After the Serial ATA PCI Host Adapter and attached drives are configured, boot up Windows.
2.At the Add New Hardware Wizard, check Specify the location of the driver (advanced), and click Next.
3.Insert the Driver CD, check Specify a location, uncheck the other boxes, and click Browse.
4.Points specify a location, example E:\SATA
5.Click Next and then Finish.
Verification of the Proper Installation for Windows 98/98SE/ME
1.Double click My Computer/Control Panel/System. Click Device Manager tab.
2.Double click SCSI Controllers, Silicon Image
3.Highlight Silicon Image