Rosewill IDE 3-in-1 user manual Thank you for purchasing a quality Rosewill Product

Page 9

IDE 3-in-1 (5.25”,3.5”,2.5”)to USB 2.0 Cable Converter Adapter RCW607

User Manual

 

 

 

 

 

 

*Solution: Please contact our RMA department for replacement.

ii.Q: After I installed RCW-607 to the hard drive, my hard drive will not run.

A:Four pin power connector is directional. If you plug in the four pin power connector in reverse, your hard drive might be damaged.

*Solution: Please make sure the direction of 4 pin power connector is correct before you plug it to your hard drive. The shape of the male 4 pin connector must fit the female connector of your hard drive as pictures shown below.

iii.Q: Fail or slow system boot up when RCW-607 was connected with PC.

A:This issue is caused by the hardware confliction of the system scanning during boot up. *Solution:Please disconnect RCW-607 from your PC before system boot up.

Connect it to PC after the Windows complete boot up.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com/

for complete warranty information and future support for your product.

If you have any question while using our products, please feel free to contact us at feedback@rosewill.com.

Image 9
Contents RCW607 Power Supply Features Cable Adapter FeaturesConnecting to the USB Bus Included in the KitConnecting IDE 3.5 Hard Drives Connecting IDE 5.25 CD/DVDConnecting IDE 2.5 Hard Drives Using the Power Supply SpecificationsFormatting & Partitioning Drives Installation Package ContentsPage Page Notification Trouble shootingThank you for purchasing a quality Rosewill Product