Rosewill RX81US-HT35B-BLK Please read this installation carefully before you use the products

Page 2

External Enclosure For 3.5” SATA to USB + eSATA		User Manual

Please read this installation carefully before you use the products.

Precaution:

zIf it is a new HDD, needs to processing the disk partition

zWin98SE and WinME do not recognize NTFS formatted drives, so if you want to use your drive on those platforms, we recommend you to use FAT32 instead.

zMac OS does not recognize NTFS formatted drives, to use your device on both platforms, we recommend you using FAT32.

zIf you use Win2000 / WinXP / Win Vista and FAT32, the biggest single partition you can create will be 32GB. To create larger partitions, you need to use the DOS command under Win98SE or WinME or change to NTFS format.

zMake sure the jumper settings of your hard drive is “master”.

zGreen light (access light) only light on when HDD accessing.

System Requirement:

zMinimum Intel Processor II 350MHz, 64MB RAM

zCompatible with IBM PC, USB interface included，Windows 98SE/ME/2000/XP/Vista operate system.

zMinimum Apple G3 processor, 64MB RAM

zMAC computer system MAC OS V8.6 or higher.

zLinux OS : please download kernel USB stack.

1

Image 2

Contents User Manual External Enclosure for 3.5 SATA to USB + eSATARX81US-HT35B-BLK Please read this installation carefully before you use the products System Requirementb. Secondary Output protection Available InterfacesProtection of DC adapter a. Primary Input Protection b.1. Over Current OC ProtectionPackage Contents FEATURETechnical Specifications 2. Fix the HDD by screws after HDD located with the connecter Installation Guide1. Pull the bottom as fig.1 to release the HDD tray 3. Aims at trail and pull in the tray into external box z Make sure your PCI Host Card is installed correctlyz If required, update your OS win 2000 to SP4, Win xp to SP1a z Only one interface at the time can be used combo modelMAC OS 8.6/9.x/above Driver Installation Windows 98SEWindows ME/2000/XP/Vista OS 9.X editionMac OS The divided partition of the external HDD Win 98SE/ME SYSTEMWindows 2000/XP/Vista Notice If you want your ENCLOSURE on a Windows as well as on your Mac OS, we recommend you to use a PC to format the drive. Choose FAT32 format and do not change anything on the partition or format on your Mac, otherwise the Windows OS can not be able to recognize the enclosure To remove the device For Windows 98SE UsersFor Windows ME/2000/XP/Vista Users After formatting can PC use in the MAC? FAQ How to solve it if you can’t use the Mobile Disk under some OSWhy I can not see the drive?