Rosewill RC403 Reporting Current or Selected Value, Reporting Supported Range of Parameter Values

PCI 56Kbps V.92 Data/fax Voice Modem Card RC403 User Manual

state of a negotiated handshake with a V.92-compliant server in V.92 Mode.

Syntax

+PMH=<value>

Defined Values

<value> Decimal number corresponding to the selected operation. 0 Modem-on-hold enabled in V.92 Mode. (Default.)

1 Disabled modem-on-hold.

Result Codes

OK 0 or 1 in V.92 Mode

ERROR Otherwise.

Reporting Current or Selected Value

Command: +PMH?

Response: +PMH: <current value>

Example: +PMH: 0 For the default setting.

Reporting Supported Range of Parameter Values

Command: +PMH=?

Response: +PMH: (<value> range)

Example: +PMH: (0,1)

+PMHT – Modem-on-Hold Timer

This command controls whether or not the modem will grant or deny a modem-on-hold (MOH) request as well as setting the MOH Timeout value.

Syntax

+PMHT=<value>

Defined Values

<value> Decimal number corresponding to selected setting.

0Deny V.92 modem-on-hold Request (Default.)

1Grant MOH with 10 second timeout

2Grant MOH with 20 second timeout

3Grant MOH with 30 second timeout

4Grant MOH with 40 second timeout

5Grant MOH with 1 minute timeout

6Grant MOH with 2 minute timeout

7Grant MOH with 3 minute timeout

8Grant MOH with 4 minute timeout

9Grant MOH with 6 minute timeout

10Grant MOH with 8 minute timeout

11Grant MOH with 12 minute timeout

12Grant MOH with 16 minute timeout