For Windows Vista, Recommended, and click Next

4 channel PCIe x 4 to SATA II Card RC218		User Manual

(Recommended), and click Next.

2.If the Hardware Installation window pops up, click Continue Anyway, then Finish. Our driver has been thoroughly tested for stability and compatibility.

3.Click Finish.

For Windows® Vista

For New Installation

1.Follow Microsoft’s Windows installation procedure.

2.At the Windows Setup screen, press Load Driver to install the driver.

3.Insert the floppy disk, please select Marvell Serial ATA Gen 2 PCI Express Adapter (A:\i386\mvsata.inf), then press Next. (Change A:\ to match your floppy drive letter)

4.Follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

1.At Found New Hardware Wizard, select Locate and install driver software (recommended).

2.Please insert the CD driver into your CD-ROM Drive, click Next.

3.If the system prompts the user informing the drivers are not signed, select the option Install this driver software anyway.

4.Click Close to complete the installation.