Rosewill AC1200UBE user manual LED Status, Wps

Page 6

Wireless 11ac Dual Band USB Adapter		AC1200UBE	User Manual

Support WMM wireless QoS feature.

Support 64/128-bit WEP, WPA, WPA2 with IEEE 802.1x functions for high level of security.

Support the most popular operating system: Windows XP/Vista/7/8; MAC OS 10.4~10.8; Linux Kernel 2.6.18~3.6.6.

Support WPS (Wi-Fi Protected Setup) hardware button for easy connection.

Support USB 3.0/2.0 interface. (11ac mode use USB 3.0 is required )

Foldable Antenna design for optimum Wi-Fi performance

1.4 LED Status

This USB Adapter contains one LED. Please refer to the following description for LED definition.

LED Name			Light Status		Description
Power/			Off		1.	No wireless network adapter is installed 2.Radio off mode.
Activity/
Activity/			On		1.	Wireless network adapter is normally installed
			On		1.	Wireless network adapter is normally installed
WPS					2.	Radio on mode.
					2.	Radio on mode.

			Blinking		1.	Transferring or receiving data.
					2.	Slow Blinking one time per seconds means WPS is
						activated. The network adapter will wait for 2 minutes to
						establish WPS connection.
					3.	Fast Blinking 30 seconds, then Solid light 15 seconds,
						means WPS connection is established successfully.

6

Image 6

Contents Wireless 11ac Dual Band USB Adapter AC1200UBE Table of Content Connection Profile Management Support techsupport@rosewill.com Call Center 800 FAX 626 Safety Information Overview Package ContentFeatures System RequirementLED Status WPSInstallation Guide Hardware DiagramUsing Realtek Utility Connect to Wireless Access Point Will restart my computer laterAC1200UBE AC1200UBE Using Windows Zero Configuration Check Windows Zero Config boxAC1200UBE Double click Network Connections Networks AC1200UBE Connection Profile Management Add a new profile Ascii / Passphrase Remove an existing profile PACAC1200UBE Edit an existing profile Set as default profile Make a copy of existing profileNetwork Statistics, General Information, and Status General InformationStatus AC1200UBE View Network Statistics Miscellaneous Settings HereEstablish secure connection with AP by WPS Click Wi-Fi Protect Setup menu PIN Code AC1200UBE Push Button Switch to AP Mode and Station Mode Soft-AP FunctionAC1200UBE Configure Ssid and Channel Wireless Network Properties is displayed Setup Soft-AP Security Advanced Settings Wireless Statistics Internet Connection Sharing ICS Appendix a Product Specification LEDAppendix B FAQ Launch config utilitiesEnable Wireless Protection in Advanced tab Disable WMM Power Save Enable in QoS tabWhat is the Ieee 802.11g standard? Appendix C GlossaryWhat is BSS ID? What is Spread Spectrum? Federal Communication Commission Interference Statement RF Exposure Information SAR