Rosewill RC212 user manual IDE/RAID Jumper Settings

SATA+ULTRA ATA RAID CONTROLLERRC212 User Manual

IDE/RAID: Jumper Settings

JP		Description
	1-2	Enable SATA Connector B
	close
J8-J11
	2-3	Enable SATA Connector C
	close
	1-2	Enable SATA Connector A
	close
J12-J15
	2-3	Enable SATA Connector D
	close

Default Mode is all jumper 2-3 close, so C-D is active and A-B is inactive on default. 1.There are four SATA ports in RC212 RAID adapter. We named these ports character

A through D. Ports C to D are internal SATA ports and A to B are external SATA ports. By changing the jumper setting (F and G) on RC212 that allows you to utilize 2 ports of this card. With different jumper setting you can active port A, B, C and D .

Note: There are four SATA ports in PCI SATA+PATA RAID card. We named these ports

5