Rosewill RC212 user manual ＊For An Existing Installation

SATA+ULTRA ATA RAID CONTROLLERRC212 User Manual

＊For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.At the Found New Hardware Wizard window pop-up, please click Cancel button to cancel the driver installation for the device at this moment. The driver for this device will be installed in the next step.

3.Please insert the CD driver bound with PCI SATA+PATA RAID card into your CD-ROM Drive.

4.At the Windows desktop, click Start, then Run.

5.Type D:\RC-212\Setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)

6.Follow the on-screen instructions to complete the installation, and then restart your system.

7.Once you have rebooted your computer. Windows® 98SE/Me will detect the PCI SATA+PATA RAID card and find a VIA VT6421 RAID Controller device. When the Add New Hardware Wizard asks What would you like to do?, select Specify the location of driver (Advanced) and click Next button.

8.When the Add New Hardware asks for the driver installation, uncheck all the boxes to allow Windows® 98SE/Me search its own driver database. Click Next to start the search.

9.The Add New Hardware Wizard will find the driver for the device VIA VT6421 RAID Controller. Click Next to continue.

10.When the driver installation is complete, click Finish.

11.Your computer must be restarted in order to complete the installation, click Yes to restart your computer.

23