Rosewill RNX-N360PC user manual WPS Configuration, PBC Push Button Configuration method

Chapter 4 WPS Configuration

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly.

If the wireless card supports WPS, you can establish a wireless connection between wireless card and router using either Push Button Configuration (PBC) method or PIN method.

First, the WPS software should be installed. Insert the Resource CD into your CD-ROM drive, and open the folder named RNX-N360PC. Double-click WPS.exe in the proper folder to start the installation, then the following screen for preparing setup will appear.

Figure 4-1

Then, please follow the clue of the Operation System to complete the WPS installation. After that, WPS function can be enabled. Here we will introduce two ways to configure the WPS (For the configuration of WPS, here takes the Wireless Router of our company for example).

4.1PBC (Push Button Configuration) method

1.Firstly, press the WPS button directly on the front panel of the Router shown in Figure 4-2.

Figure 4-2

2.Double click the icon on the desktop to open the WPS Utility and then you can see the welcome screen shown as Figure 4-3.Click Next to continue. Then select Push

32