Figure
The following table describes the items found on the Current Status screen.
¾Profile Name - This shows the name of current selected configuration profile. The configuration of Profile name will be described on the General tab of Profile Management.
¾Link Status - This shows whether the station is associated to the wireless network.
¾Wireless Mode - Here displays the wireless mode.
¾Network Type - The type of network and the station currently connected are shown here. The options include:
•Infrastructure (Access Point)
•Ad Hoc
)Note:
You can configure the network type and wireless mode on the Advanced tab of Profile Management.
¾IP Address - This displays the computer’s IP address.
¾Control Channel - This shows the currently connected channel.
¾Data Encryption - Here displays the encryption type the driver is using. You can configure it on the Security tab of Profile Management.
¾Server Based Authentication - This shows whether the server based authentication is used.
¾Signal Strength - This shows the strength of the signal.
Click Advanced on the screen above, you can see advanced information about the program and its operations.
3.2Profile Management
Click the Profile Management tab of the Wireless N Client Utility and the next screen will appear (shown in Figure
17