Roland PC-600 operation manual QuarkXPress

selection to RGB color if the file is an RGB file. Also, you must uncheck PostScript Color Management.

13Select Printer Specific Options from pop-up menu. If you want the file to be printed automatically, select Print in the After Sending option. If you want to verify the print mode and the profile settings before printing the file, select Hold. Select Hold in the After Printing if you want to keep the file in the Print Monitor after the file is printed.

14 Click Print to start printing.

QuarkXPress 3

1QuarkXPress requires a Printer Description File (PDF) to access specific options of the printer. Install the file ‘Roland ColorCAMM.PDF’ from Roland COLORCHOICE CD > Quark Files to the ‘Quark XPress:PDF’ folder, before starting QuarkXPress.

2From the Roland COLORCHOICE Print Monitor click Setup>Setup Properties. Then click the Print tab.

3Make sure the Perform Color Correction checkbox has a check in it, correct profiles and rendering intent are set.

4Click OK to close Setup Properties.

5Go to Apple menu and select Chooser. Highlight Adobe PS and make sure ColorCAMM PC-600@... is selected.

6Launch QuarkXPress. If you are using the EFIColor XTension, select Edit>Preferences>EfiColor and uncheck

29