Roland PC-600 operation manual Uninstalling the Software Macintosh, Outputting a Test File

25 Click Setup. You are prompted to select a PPD (PostScript printer description).

26Locate the PPD for the output device you are using (AmPC600.ppd), highlight it. Then click Select. You will find it in the System Folder/Printer Description folder.

Uninstalling the Software (Macintosh)

Follow these steps to uninstall the Roland COLORCHOICE Software from your Macintosh.

1Quit the Roland COLORCHOICE Software, if it is still open.

2Drag the RCC for ColorCAMM Folder into the Trash.

3Open the System folder.

•From the Preferences folder, drag the two RCC for ColorCAMM preference files into the Trash.

•Locate and open the ‘Extensions’ folder. Drag the Am_ColorCAMM PC-600 spooler file into the Trash. From the ‘Printer Descriptions’ folder, located within the ‘Extensions’ folder, drag the PPD files, named according to your output device, into the Trash.

4Restart your computer.

5Hold down the Option key while you empty the Trash.

6The software is now uninstalled.

Outputting a Test File

To insure that your software is properly installed and that a connection to the printer is established, select Setup>Test Print or Test Cut. When you do this a small test file is sent to the Print Monitor and then processed. Once you’ve successfully generated a test file, be sure to read the rest of this document to learn about other features.

8