Rosewill RC412 user manual Networking, Front Panel LED Indications

16 Port 10/100 Mbps Nway Switch RC412 User Manual

Networking

Connecting computers to Switch

1.Make sure all computers to be connected to the Switch have installed properly a network interface card.

2.Connect computer to the Switch with a twisted-pair cable. The cable should have RJ-45 plugs. Use Category 5 cable for all

connections. Please pay attention to the length of each cable should be less than 100 meters.

3.Plug one end of the cable to the RJ-45 port of the computer’s NIC. Plug the other end to any available port on the Switch.

Front Panel LED Indications

LED	Status	Description
Power	ON	Power On
Act	ON	A valid connection
	Blink	Receiving Packets
		4