Connection, Operation, Mounting, Level Adjustement

CONNECTION

Shown here is an example of possible input connections to the GCi404.

•If the microphone connected to the Mic Input is a condenser micro- phone, move the Phantom Power jumper to the ON position.

•The guitar signal may also be connected to a guitar preamp or processor before being connected to the GCi404.

•Turntables must use all three con- nections; the Right, Left, AND the Ground terminals are required for proper operation.

•Standard CD players may be con- nected to the RCA LINE INPUT in the same manner as the Portable CD Player.

Shown here is an example of possible output connections from the GCi404 to your computer.

•The unit is powered via the included Rolls PS27, or con- nected to a 3-1/2” floppy drive power cable.

•The CD Input connects via a

4-pin connector to your CD Rom drive.

•The Stereo Output connects directly to your

sound-card Input via a stereo Tip-Ring-Sleeve 1/8” (3.5mm) cable.

•The Line Output port uses a 4-pin header cable to connect to your sound-card Input header connector (if available).

OPERATION

MOUNTING

Make sure the computer is off, and the AC power cord is unplugged.

Select the drive bay you wish to mount the GCi404 into. Remember that you will have cords hanging down from the unit, so below a CD Rom drive is recommended. Re- move the drive bay cover and gain access to the inside of your computer.

Place the GCi404 into the open drive bay and secure it to the computer’s internal mounting brackets using the enclosed mounting screws.

Connect all Power and Output cables. Plug the computer back into an

AC outlet, and start it up.

LEVEL ADJUSTEMENT

Connect the microphone, instrument, and line/phono sources. If the microphone being used is a condenser type, move the Phantom Power jumper to the ON position.

Bring up the software you will be using for recording. Set the LINE LEVEL control to approximately 12 O’Clock. Send a signal from the line sources (CD players, turn- tables, cassette players etc.) first and adjust the Recording

Control levels for a maximum input signal without clipping. You may need to refer to your operating system Help menues or owners manual for assistance in adjusting input record- ing levels.

Once you have a desired signal level, send signals from your instrument and microphone and adjust the Levels on the GCi404 front panel for appropriate levels.

DUCKING

NOTE: Adjustements for the Ducking function are made on the rear panel of the GCi404. You will need access to the inside of the computer if it is mounted in a drive bay.

To automatically mute all signals under your microphone, move the DUCKING jumper to the ON position.

Send program material such as music to the Line Inputs. Speak normally into the micro- phone and adjust the DEPTH control until the desired amount of Line signal is heard un- der your voice. If you want the Line signal muted completely, set the DEPTH control fully clockwise. Set the RELEASE control for the desired amount of time taken to return the level of Line signal back to normal after you stop speaking. When the RELEASE control is set fully counterclockwise, the time is at its longest. As the RELEASE control is adjusted clockwise, the release time gets shorter (faster).

GCi404 specifications

The Rolls GCi404 is a state-of-the-art generator set designed for various power generation applications. Leveraging advanced technologies and engineering excellence, the GCi404 stands out for its reliability, efficiency, and innovation. It is particularly favored in industrial, commercial, and emergency power settings, catering to diverse customer needs.

One of the most noteworthy features of the Rolls GCi404 is its robust engine. Powered by a high-performance diesel engine, the generator set offers exceptional load handling capabilities. Designed for efficiency, the engine incorporates cutting-edge fuel injection technology that enhances combustion efficiency, leading to reduced fuel consumption and lower emissions. This results in a more sustainable power solution, meeting stringent environmental standards while delivering high output.

The GCi404 also boasts a significant generator size, with a power output ranging up to 400 kW. This capacity enables the unit to support critical infrastructure, including hospitals, data centers, and manufacturing facilities. The generator's voltage regulation system ensures a stable power supply, mitigating the risk of damage to sensitive equipment and maintaining operational consistency.

Another key characteristic of the GCi404 is its advanced control panel. This user-friendly interface provides real-time data monitoring, allowing operators to track performance metrics easily. It also features remote access capabilities, enabling monitoring and control from a distance. This integration of smart technology allows for predictive maintenance, reducing downtime and optimizing performance.

In terms of construction, the Rolls GCi404 is built with durability in mind. Its weather-resistant enclosure protects the internal components from external elements, making it suitable for outdoor installation in harsh environments. The compact design also facilitates easy transportation and installation, ensuring versatility across various locations.

Additionally, the GCi404 incorporates advanced safety features, including automatic shut-off systems and comprehensive alarm functions. These characteristics guarantee safe operation, complying with industry safety standards.

Overall, the Rolls GCi404 generator set is a reliable, efficient, and innovative power solution that meets the demanding needs of modern industries. With its powerful engine, advanced control technology, durable construction, and safety features, the GCi404 is designed to provide unparalleled performance and peace of mind in any power generation scenario.