Rose electronic KVM SWITCH WITH ON-SCREEN DISPLAY manual Keyboard Commands, Keyboard commands

KEYBOARD COMMANDS

Keyboard commands

The following table describes the available keyboard commands. The <Ctrl> key sequence is a press and release of the left control key. Commands following <Ctrl> must be entered within 2 seconds.

Command	Key sequence	Description
OSD menu	<Ctrl> F12	Displays on-screen menus
CPU select	<Ctrl> ESC	List of CPUs to select
Select	<Ctrl> nnn where nnn	Connects the KVM station to
computer	= computer number	the selected computer.
Next computer	<Ctrl> +	Selects next sequential CPU
Previous	<Ctrl> -	Selects previous sequential
computer		CPU.
Scan ON	<Ctrl> S	Turns scan mode on
Scan OFF	<Ctrl> X	Turns scan mode off
Display label	<Ctrl> D	Turns CPU label on/off
Logoff	<Ctlr> L	Disconnects from currently
		connected computer.
Set mode	<Ctrl> Mnn <Enter>	Alternate way to configure
	where nn = mode	keyboard and mouse.
	value from Table 5.
Set resolution	<Ctrl> Yn <Enter>	Alternate way to set screen
	where n = resolution	resolution when no video is
	value from Table 6	present from a CPU..
Screen saver	<Ctrl> Vnnn <Enter>	Alternate way to set screen
time	where n = 0 –999 sec.	saver time.
Null mouse	<Ctrl> N	Used to re-sync a PS/2
command		mouse.
Reset mouse	<Ctrl> O (alpha O)	Resets computer’s mouse.
Reset	<Ctrl> R	Resets and enables mouse
command		and keyboard on currently
		selected computer
Max computers	<Ctrl> Pnnn	Total ports used (all units)
Units	<Ctrl> Unn	Number of expansion units.
Width	<Ctrl> Wnn	Number of ports on
		expansion units.
Keep	<Ctrl> K	Saves to flash memory.
Table 4. Keyboard commands
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL			27