To unload the labels, press and release the SHIFT Key and then press and release the FEED Key. When reverse feeding labels that have been printed, or have moved past the ribbon tearbar, push labels toward drive roller while reverse feeding to prevent snagging of labels, or tear off excess labels before unloading.
WARNING:
When using heat shrink tubing, the liner must be cut or torn along the perforation by hand. Trying to use the tear bar to cut the heat shrink liner will not work, and may damage the tear bar.
Step 3: Entering the Label Code:
All LS3E label rolls have a 4 digit label code. The label code can be found inside the label core, on a label attached to the first label on the roll, and also on the box label. Using the key pad, key in the 4 digit code and then press the ENTER Key, or simply press the ENTER Key if desired label code is already displayed in the LCD.
Step 4: Selecting the Desired Format:
To view the format of your label or to change that format press the SETUP Key. This will display the SETUP menu screens where you may view or change the label format. The SETUP menu consists of 11 menus with between 1 and 11 options per menu. To change between
each menu use the |
| or |
|
|
|
|
| Keys. To view options |
within each menu use the |
| or |
| Keys. The option with | ||||
| ||||||||
|
| |||||||
|
|
|
|
|
|
|
|
|
the * beside it shows the selected option. To select an option, press the ENTER Key. An * will appear to the left verifying your selection. Once all desired options and features have been selected press the “X” Key and this will display the SETUP menu exit screen. Press the ENTER Key to exit the SETUP menu and you are ready to enter your label legend.
9