Metrik Mobile Electronics MCD-797 warranty Location and Function of Controls, Specification

SPECIFICATION

GENERAL
Supply Voltage	DC 13.8V. Negative Ground
Current Consumption	Max.10A
MAX Power Output	25Watts X 4
Number of channels	2 STEREO channels.
Unit Dimensions	178[W] X 164[D] X 50[H] mm.
FM SECTION
Frequency range	87.5MHz -107.9MHz
Effective sensitivity	3uV.
I.F Frequency	10.7MHz.
AM SECTION
Frequency range	530KHz - 1710KHz
Effective sensitivity	40dB.
I.F Frequency	450KHz
RCA LINE OUT (OPTION)
Output	1200mV @ CD MAX.
CD PLAYER
System	MP3 Audio System.
Suitable CDs	MP3, CD, CD-R, CD-RW Disc
Frequency characteristics	20Hz-100Hz < 5dB
	\
	10KHz-20KHz < 5dB.
S/N Ratio to CD	\
	50dB [1KHz]

LOCATION AND FUNCTION OF CONTROLS

1. SEL( AUDIO MODE SELECT) BUTTON / ROTARY VOL KNOB

(1)Press SEL button shortly and repeatedly to change the mode in the sequence as follows: --> VOL --> BAS --> TRB --> BAL --> FAD -->

1)VOLUME CONTROL

A.The volume level can be adjusted at any time by rotating the VOL knob as select mode has been initially defaulted at volume mode.

B.The volume level is also obtained by stepping through the SEL button until the function VOL is displayed and then rotate the VOL knob to adjust the sound level.

2)BASS CONTROL

A.Press the SEL button to select the bass mode until BAS appears on the display.

B.Rotate the VOL knob to adjust the bass effect.

3)TREBLE CONTROL

A.Press the SEL button to select the treble mode until TRE appears on the display.

B.Rotate the VOL knob to adjust the treble effect.

4)BALANCE CONTROL

A.Press the SEL button to select the balance mode until BAL appears on the display.

B.Rotate the VOL knob to increase or decrease the sound level of left or right speaker.

Page 13 Page 2