Planet Technology VC-412 user manual Telnet Setup, For Windows 95/98/NT/2000/XP

Page 13

VC-412 User’s Manual

.

Once you have assigned a valid IP address to the Switch, proceed to chapter 4 for an explanation of the menu systems and commands.

2.3Telnet Setup

Once you have setup the switch IP address via the Console Port, you are ready to access the management functions from any station on your network via Telnet. To connect, simply start your telnet client and enter the address you configured into the switch (Device IP Address). Below you can see an example of using the standard Windows® Telnet client. Before using Telnet, you must first know your Switch device IP address. The IP should have been set earlier in the Console setup section. If the IP address has not yet been set, refer to the quick installation guide.

For Windows 95/98/NT/2000/XP:

A.Press on Start Menu, then on RUN, type in telnet and the device IP address. For example, if the IP address is 192.168.0.1, type “telnet 192.168.0.1” and hit enter.

B.Connection will initiate and you will be prompt to enter password.

C.The default password is admin, unless it has been changed previously.

Once you have logged into the switch, proceed to the next section for an explanation on issuing ICD commands.

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents VC-412 FCC Warning CE Mark Warning TrademarksRevision For Model VC-412 Part No. EM-VC412V1 Installation VC-412 User’s Manual Introduction FeatureManagement Features VC-412 Technical SpecificationsPackage Contents & Hardware Description LED LED Indicators And Button DefinitionButton Function Connecting VC-412 InstallationConsole Port Setup VC-412 User’s Manual For Windows 95/98/NT/2000/XP Telnet SetupWeb configuration setup WEB ConfigurationImportant Username and password are both case sensitive Unit Information Monitor ConfigurationPort Information System Configuration System configurationReset To Default Reboot System Network ConfigurationProtocol Control Snmp Access Table Snmp Trap Receiver Table VC-412 User’s Manual Main Menu Selections Management Configuration Commands for Console and TelnetSystem Configuration VC-412 User’s Manual Network Configuration VC-412 User’s Manual System MIB Configuration Snmp Access Table/SNMP Trap Receive Control Table Vdsl Unit Control Pass-Through ICD Command to UnitSet Each Vdsl Port Name of Unit Display All Ports Status of Unit Display All Trunks Status of Unit Reboot System Reset To DefaultLogout Enter ICD command line interface ICD Commands for Telnet and ConsolePlease find the following table for available commands ICD command Index TableVlan Command Vlan settings when Vlan is on Setting Vlan FunctionalityExamples Vdsl Command Port Command VC-412 User’s Manual Appendix a VC-412 Factory Default VC-412 User’s Manual VC-412 User’s Manual VC-412 User’s Manual

VC-412 specifications

Planet Technology VC-412 is an innovative product designed to enhance networking capabilities in a variety of settings, from small businesses to larger enterprise environments. This robust device operates as a versatile network switch, specifically designed to meet the growing demands for connectivity in today’s data-driven world.

One of the key features of the VC-412 is its ability to support Power over Ethernet (PoE), enabling the simultaneous transmission of data and power over the same Ethernet cable. This capability simplifies installation and reduces clutter, as it eliminates the need for additional power sources for devices such as IP cameras, wireless access points, and VoIP phones. The VC-412 offers different PoE standards, ensuring compatibility with a wide range of devices.

The VC-412 is equipped with multiple Gigabit Ethernet ports, providing high-speed data transmission crucial for bandwidth-intensive applications. With a total of 12 ports, it facilitates seamless connectivity for multiple devices, whether in an office or a retail environment. What stands out with the VC-412 is its impressive switching capacity, which significantly enhances network performance and efficiency.

In terms of technology, the VC-412 incorporates advanced networking protocols and features that optimize data flow and enhance security. The device supports VLAN (Virtual Local Area Network) configurations, enabling users to segment the network for better traffic management and improved security. This feature is particularly beneficial for organizations looking to protect sensitive data and manage network access effectively.

Additionally, the VC-412 supports Quality of Service (QoS) mechanisms. This is vital in environments where certain applications, like video conferencing or online gaming, require guaranteed bandwidth and low latency. QoS enables prioritization of network traffic, ensuring that critical applications run smoothly without disruption.

The VC-412 is also designed with user convenience in mind. It boasts a user-friendly web-based management interface, allowing network administrators to configure settings, monitor performance, and troubleshoot issues easily. This interface simplifies the management process and enhances the overall user experience.

Overall, Planet Technology VC-412 stands out as a feature-rich network switch that combines PoE capabilities, high-speed connectivity, advanced networking protocols, and user-friendly management tools. Its design caters to the diverse needs of modern networking environments, making it a valuable asset for any organization striving to enhance its network infrastructure. With the VC-412, businesses can expect improved connectivity, efficiency, and security, ultimately driving productivity in their operations.
Top Page Image Contents