Planet Technology VC-412 user manual Port Command

Page 41

VC-412 User’s Manual

connected port of the VC-412 to the same speed. The reason you need to set the speed on the remote modem first is when you adjusts the speed on the remote modem, connection with end since speeds on both sides will be different. After setting the VC-412 port to the same speed as the remote modem, connection will re-establish if it is within the distance limitation. For example if you want to test the quality of transmission with the stream rate speed at speed level-B (5 Mbps symmetric). You will enter the following commands in the ICD command interface.

RT 10-B

Connection will end

LT 10-B

Connection will re-establish if within the range.

If connection does not establish with new speed level, reset the switch and wait approximately 47 seconds for the switch and the remote modem to recalibrate.

5.5 Port Command

The “P” command displays all the VDSL ports status including its speed and speed mode. AUT represents Auto-speed mode, PRE represents preset speed and MAN represents manual set speed. At the speed column you will see a representation of preset speed and the current speed of each port. The numerator is preset speed (“*” means not applicable) and the denominator is current speed. Please refer to the ICD Command Index table for reference.

37

Page 40 Page 42
Image 41
Page 40 Page 42
Contents VC-412 Revision For Model VC-412 Part No. EM-VC412V1 TrademarksFCC Warning CE Mark Warning Installation VC-412 User’s Manual Introduction FeatureManagement Features VC-412 Technical SpecificationsPackage Contents & Hardware Description LED LED Indicators And Button DefinitionButton Function Connecting VC-412 InstallationConsole Port Setup VC-412 User’s Manual For Windows 95/98/NT/2000/XP Telnet SetupWeb configuration setup WEB ConfigurationImportant Username and password are both case sensitive Port Information Monitor ConfigurationUnit Information System Configuration System configurationReset To Default Protocol Control Network ConfigurationReboot System Snmp Access Table Snmp Trap Receiver Table VC-412 User’s Manual Main Menu Selections Management Configuration Commands for Console and TelnetSystem Configuration VC-412 User’s Manual Network Configuration VC-412 User’s Manual System MIB Configuration Snmp Access Table/SNMP Trap Receive Control Table Set Each Vdsl Port Name of Unit Pass-Through ICD Command to UnitVdsl Unit Control Display All Ports Status of Unit Display All Trunks Status of Unit Reboot System Reset To DefaultLogout Enter ICD command line interface ICD Commands for Telnet and ConsolePlease find the following table for available commands ICD command Index TableVlan Command Vlan settings when Vlan is on Setting Vlan FunctionalityExamples Vdsl Command Port Command VC-412 User’s Manual Appendix a VC-412 Factory Default VC-412 User’s Manual VC-412 User’s Manual VC-412 User’s Manual

VC-412 specifications

Planet Technology VC-412 is an innovative product designed to enhance networking capabilities in a variety of settings, from small businesses to larger enterprise environments. This robust device operates as a versatile network switch, specifically designed to meet the growing demands for connectivity in today’s data-driven world.

One of the key features of the VC-412 is its ability to support Power over Ethernet (PoE), enabling the simultaneous transmission of data and power over the same Ethernet cable. This capability simplifies installation and reduces clutter, as it eliminates the need for additional power sources for devices such as IP cameras, wireless access points, and VoIP phones. The VC-412 offers different PoE standards, ensuring compatibility with a wide range of devices.

The VC-412 is equipped with multiple Gigabit Ethernet ports, providing high-speed data transmission crucial for bandwidth-intensive applications. With a total of 12 ports, it facilitates seamless connectivity for multiple devices, whether in an office or a retail environment. What stands out with the VC-412 is its impressive switching capacity, which significantly enhances network performance and efficiency.

In terms of technology, the VC-412 incorporates advanced networking protocols and features that optimize data flow and enhance security. The device supports VLAN (Virtual Local Area Network) configurations, enabling users to segment the network for better traffic management and improved security. This feature is particularly beneficial for organizations looking to protect sensitive data and manage network access effectively.

Additionally, the VC-412 supports Quality of Service (QoS) mechanisms. This is vital in environments where certain applications, like video conferencing or online gaming, require guaranteed bandwidth and low latency. QoS enables prioritization of network traffic, ensuring that critical applications run smoothly without disruption.

The VC-412 is also designed with user convenience in mind. It boasts a user-friendly web-based management interface, allowing network administrators to configure settings, monitor performance, and troubleshoot issues easily. This interface simplifies the management process and enhances the overall user experience.

Overall, Planet Technology VC-412 stands out as a feature-rich network switch that combines PoE capabilities, high-speed connectivity, advanced networking protocols, and user-friendly management tools. Its design caters to the diverse needs of modern networking environments, making it a valuable asset for any organization striving to enhance its network infrastructure. With the VC-412, businesses can expect improved connectivity, efficiency, and security, ultimately driving productivity in their operations.
Top Page Image Contents