Sanyei America 78-16401-01 setup guide Setting Up Your Network, Reports

Chapter 3 Preparing to Use Campus Manager

Setting Up Campus Manager Applications

This section contains:

•Setting Up Your Network

•Configuring Device Discovery

•Configuring Data Collection

•Setting Up Topology Services

•Setting Up User Tracking

•Setting Up Path Analysis

•Starting Up VLAN Port Assignment

•Setting Up Discrepancy Reports

•Logging Out as Administrator

Note Many tasks require the administrator login.

Setting Up Your Network

To ensure that the ANI Server successfully discovers the devices in your network, you must set up your network correctly. Table 3-2shows the required tasks for each application, marked by x.

For more information, see User Guide for Campus Manager 4.0.

Table 3-2	Network Setup Tasks
		Topology	User	Path	VLAN Port	Discrepancy
Network Setup Requirement		Services	Tracking	Analysis	Assignment	Reports
Connect to seed device.		x	x	x	x	x
Enable Simple Network		x	x	x	x	x
Management Protocol (SNMP).
Enable Cisco Discovery Protocol		x	x	x	x	x
(CDP).
Enable Call Detail Record (CDR).		–	–	x	–	–
Set a unique sysName variable on		x	x	x	x	–
devices.
	Installation and Setup Guide for Campus Manager 4.0 on Windows
3-4						78-16401-01