Chapter 3 Preparing to Use Campus Manager
Setting Up Campus Manager Applications
Table | Network Setup Tasks (continued) |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| Topology |
| User | Path | VLAN Port | Discrepancy |
Network Setup Requirement | Services |
| Tracking | Analysis | Assignment | Reports | |
|
|
|
|
|
|
| |
Enable Integrated Local | x |
| x | x | x | x | |
Management Interface (ILMI) on |
|
|
|
|
|
| |
ATM devices. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Configure DNS. |
| x |
| x | x | x | x |
|
|
|
|
|
|
| |
Configure VLAN Trunk Protocol | x |
| x | x | x | x | |
(VTP). |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Configure VLAN trunks on Fast | x |
| x | x | x | x | |
Ethernet and Gigabit Ethernet. |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
Create the default configuration | x |
| x | x | x | x | |
server for ATM LAN Emulation |
|
|
|
|
|
| |
(LANE). |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable source routing. | – |
| – | x | – | – | |
|
|
|
|
|
|
|
|
After you set up your network, continue to the “ “Configuring Device Discovery” section on page
Configuring Device Discovery
To configure Device Discovery:
Step 1 From CiscoWorks Homepage, select Campus Manager > Administration.
The Campus Administration window opens.
Step 2 Click on Discovery > Seed devices.
Step 3 Specify the seed device and IP address range.
Step 4 Click OK to start Device Discovery.
If IP address range is not specified, Device Discovery will try to discover as many devices as it can based on the community strings and connectivity.
|
| Installation and Setup Guide for Campus Manager 4.0 on Windows |
|
|
|
|
| ||
|
|
| ||
|
|
|