Symbol Technologies ES3000 manual Snmp-server community, Index, Global configuration, Cisco

5-18ES3000 User Guide

EXAMPLE:

!Set system Contact Information "MIS_1" Switch(config)# snmp-server contact MIS_1 Switch(config)#

!Clean system Contact Information to default Switch(config)# no snmp-server contact Switch(config)#

snmp-server community

Use the snmp-server community command to set up the community access string for use with SNMP protocol.

snmp-server community <index> <community> <privilege> [<ip>]

SYNTAX DESCRIPTION:	<index>	1-10
	<community>	A string of length with 20 characters maximum
	<privilege>	RO	Specifies read-only access
		RW	Specifies read-write access
	<ip>	Manager IP address.
DEFAULT VALUE:
COMMAND MODES:	Global configuration
REFERENCE:	Cisco
MENU:	Basic Switch Configuration Menu->SNMP->Set SNMP Read Community

EXAMPLE:

!Set SNMP Read Community "public" in index-1 for all IP Switch(config)# snmp-server community 1 public RO Switch(config)#

!Set SNMP Write Community "private" in index-3 for IP 192.168.0.1 Switch(config)# snmp-server community 3 private RW 192.168.0.1 Switch(config)#