Symbol Technologies ES3000 manual Dot1x timeout tx-period, Dot1x max-req count

5-98ES3000 User Guide

dot1x timeout tx-period

Use this command to set the number of seconds the switch waits for a response to an EAP-request/identity frame from the client before retransmitting the request.

dot1x timeout tx-period <second>
SYNTAX DESCRIPTION: <second>	Set the number of seconds
DEFAULT VALUE:

COMMAND MODES: Interface configuration

REFERENCE:Cisco

MENU:

EXAMPLE:

!Set transmit time 60 sec on port 3 Switch(config)# interface fastethernet0/3 Switch(config-if)# dot1x timeout tx-period60 Switch(config-if)#

dot1x max-req

Use the dot1x max-req command to set the number of times the switch sends an EAP-request/identity frame to the client before restarting the authentication process.

dot1x max-req <count>
SYNTAX DESCRIPTION: <count>	Set the number of times
DEFAULT VALUE:

COMMAND MODES: Interface configuration

REFERENCE:Cisco

MENU:

EXAMPLE:

!Set request times 4 on port 3 Switch(config)# interface fastethernet0/3 Switch(config-if)# dot1x max-req4 Switch(config-if)#