Setting the Test Tone
Use the Test Tone feature to check the speaker connections.
Setting the DRC (Dynamic Range Compression) | ENG |
|
This feature balances the range between the loudest and quietist sounds.
You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
| In Stop or no |
| 2 | Press Cursor |
|
|
|
| Press Cursor button | ||||
| disc mode, |
|
|
|
| button to move to |
| to move to ‘TEST | |||||
1 press MENU |
| ‘Audio’ and then | 3 | TONE’ and then press | |||||||||
| press ENTER button. | ENTER button. | |||||||||||
| button. |
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| • The test tone will be sent to L ➝ C ➝ | |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| R ➝ SR ➝ SL ➝ SW in order. | |
|
|
|
|
|
|
|
|
|
|
|
| If the ENTER button is pressed again | |
|
|
|
|
|
|
|
|
|
|
|
| at this time, the test tone will stop. | |
| MOVE ENTER | EXIT |
|
|
|
|
| MOVE ENTER | EXIT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 In Stop or no disc mode, press MENU button.
Press Cursor 2 button to move to
‘Audio’ and then press ENTER
button.
MOVE | ENTER | RETURN | EXIT |
MOVE | ENTER | EXIT | MOVE | ENTER | EXIT |
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
Alternate method: press the TEST TONE button on the remote.
Press TEST TONE button. | L: Front Speaker (L) C: Center Speaker |
STOPEXIT
SW: Subwoofer
Press Cursor 3 button to move to
‘DRC’ and then press ENTER button.
4 Press Cursor , to adjust
the ‘DRC’.
•When the Cursor button is pressed, the effect is greater, and when the Cursor button is pressed, the effect is smaller.
SETUP
•Test tone will be produced as follows:
When playing a DVD or CD, this will work only in Stop mode.
•Use this function to check that each speaker is correctly connected and that there is no problem.
•When there is no input signal from the HDMI IN function, the Test Tone will not work.
To end the test tone,
press TEST TONE button again.
R: Front Speaker (R) SL: Rear Speaker (L) SR: Rear Speaker (R)
Start
MOVE | ENTER | RETURN | EXIT | CHANGE | RETURN | EXIT |
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
59 | 60 |