Premium power protection is now easier than ever

Powerware 9155/Powerware 9355 shown in perspective.

Premium power protection is now easier than ever.

With raised-floor real estate at a premium, you will appreciate that these UPSs are only 12” wide and 33” deep, including internal bat- teries. With such a small footprint, you have more location options, and more space is available for future expansion.

Equipment installation is easy, essentially plug-and-play. You can order either UPS with your choice of output receptacles with more than 17 types. To change or move data center equipment, you sim- ply unplug from the old receptacle, plug into a new one, and go. No need for an electrician to run new conduit and wiring.

Scalable architecture meets current and future load requirements.

Powerware 9155 UPSs are available in four models (8, 10, 12, and 15 kVA). Powerware 9355 UPSs come in 10 and 15 kVA models, so you can choose the configuration that most closely meets your capacity requirements and price point.

Powerware 9355 rear view with optional output receptacles

And you can scale from there. Using our signature Powerware Hot Sync paralleling technology, up to three (Powerware 9155) or up to four (Powerware 9355) equivalent UPS modules can be paralleled for extra capacity or redundancy. A 15 kVA UPS, for example, can grow to support loads of up to 45 kVA. There’s no dependence on communications wiring among those UPS modules.

Battery innovations optimize battery performance and service life.

Standard internal batteries provide power until auxiliary power takes over or systems are gracefully shut down. Battery runtime can be extended to hours by adding matching Extended Battery Modules (EBMs).

POWERWARE UPS BACKUP TIMES (IN MINUTES)

		UPS	(1)	(2)	(3)	(4)	UPS	(1)	(2)	(3)
		+ Internal	EBM	EBM	EBM	EBM	+ Internal	EBM	EBM	EBM
VA	Watt	32 Battery	64	64	64	64	64 Battery	96	96	96
15000	13500	4.6	23.0	43.0	65.1	88.6	13.3	43.0	76.7	113
14500	13050	4.9	24.1	45.2	68.3	93.0	14.1	45.2	80.5	119
14000	12600	5.2	25.2	47.3	71.5	97.4	14.9	47.3	84.2	125
13500	12150	5.5	26.4	49.4	74.7	102	15.8	49.4	88.1	130
13000	11700	5.8	27.6	51.6	78.1	106	16.7	51.6	92.0	136
12500	11250	6.1	28.8	54.0	81.6	111	17.6	54.0	96.2	142
12000	10800	6.5	30.2	56.5	85.5	116	18.6	56.5	101	149
11500	10350	6.9	31.6	59.3	89.7	122	19.2	59.3	106	156
11000	9900	7.3	33.3	62.4	94.4	129	20.2	62.4	111	164
10500	9450	7.8	35.1	65.9	99.6	136	21.4	65.9	117	174
10000	9000	8.4	37.2	69.8	106	144	22.6	69.8	124	184
9500	8550	9.1	39.6	74.2	112	153	24.1	74.2	132	196
9000	8100	9.9	42.3	79.4	120	163	25.7	79.4	141	209
8500	7650	10.8	45.5	85.2	129	175	27.6	85.2	152	225
8000	7200	11.9	49.1	91.9	139	189	29.8	91.9	164	242
7500	6750	13.1	53.2	99.7	151	205	32.3	99.7	178	263
7000	6300	14.6	58.0	109	164	224	35.2	109	194	286
6500	5850	16.3	63.5	119	180	245	38.6	119	212	314
6000	5400	18.4	70.0	131	198	270	42.5	131	234	346
5500	4950	20.1	77.6	145	220	300	47.2	145	259	383
5000	4500	22.4	86.6	162	245	334	52.6	162	289	428
4500	4050	25.2	97.4	182	276	376	59.2	182	325	-
4000	3600	28.6	110	207	313	426	67.1	207	369	-
3500	3150	32.8	127	238	359	-	77.0	238	423	-
3000	2700	38.3	148	277	418	-	89.7	277	-	-
2500	2250	45.6	176	329	-	-	107	329	-	-

Note: Backup times are approximate and may vary with equipment, configuration, battery age, temperature, etc.

9355 specifications

The Powerware 9355 series is a highly regarded uninterruptible power supply (UPS) designed to deliver reliable power protection for critical IT and data center applications. This advanced UPS system is known for its high efficiency, robust performance, and cutting-edge technologies that cater to the needs of modern organizations.

One of the main features of the Powerware 9355 is its double-conversion online architecture. This design ensures that equipment connected to the UPS receives consistently clean and stable power, free from disturbances such as voltage sags, surges, or frequency variations. This is crucial in environments where even slight power interruptions can lead to data loss or equipment damage.

The Powerware 9355 utilizes advanced digital signal processing technology, which enhances its performance and reliability. This technology enables more accurate voltage regulation and system diagnostics, allowing users to monitor and manage their power systems effectively. Embedded with intelligent communication capabilities, the UPS can interact with other equipment and provide real-time data on power conditions, battery status, and overall system health.

Efficiency is a hallmark of the Powerware 9355. With energy efficiency ratings of up to 94%, it helps organizations reduce energy consumption and lower operational costs while contributing to environmentally sustainable practices. This UPS features a modular design that allows for easy scalability; users can add additional power modules as their needs grow without significant downtime.

The Powerware 9355 also emphasizes battery management and maintenance. It employs advanced algorithms for battery conditioning and automatic testing, ensuring optimal battery performance and extending lifespan. This predictive maintenance approach minimizes the risk of unexpected failures and enhances system reliability.

Another standout characteristic is its user-friendly interface, which includes an LCD display that provides real-time information on UPS status, power levels, and alerts. This intuitive interface facilitates quick navigation and makes it easy for operators to diagnose problems, ensuring that the system remains in peak operating condition.

Incorporating advanced features tailored for critical applications, the Powerware 9355 stands as a top choice for businesses seeking robust, reliable, and efficient power protection solutions. With its combination of reliability, efficiency, and intelligent technologies, the Powerware 9355 is poised to meet the demands of today's dynamic power requirements.