P.SCAN (Progressive Scan) Function
Unlike a regular Interlace Scan in which two fields of picture information are alternated to create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses one field of information (all lines displayed in one pass) to create a clear and detailed picture without visible scan lines.
Hold the P.SCAN button down for longer than 1 second.
•The selection switches back and forth between "P.SCAN" and "I.SCAN" each time the button is held down for a minimum of 1 second.
•The previous mode is indicated in the display first, followed by the selected mode in about a second.
Interlaced Scan (1 FRAME = 2 FIELDS) | Progressive Scan (FULL FRAME) |
Connecting the Antennas
FM Antenna (supplied)
|
|
| AM Loop Antenna | CONNECTIONS |
|
|
|
| |
|
|
| (supplied) |
|
|
|
| Snap the tabs on the loop |
|
|
|
| into the slots of the base to |
|
|
|
| assemble the AM loop |
|
1 | 2 | 3 | antenna. |
|
|
| |||
|
|
| If AM reception is poor, connect an outdoor AM |
|
|
|
| antenna(not supplied). |
|
FM antenna connection | AM(MW) antenna connection |
|
In | The progressive scanning method scans one full frame of |
interlaced fields (odd and even), where each field | video consecutively down the screen, line by line. |
contains every other horizontal line in the frame. | As opposed to the interlaced scanning process by which a |
The odd field of alternating lines is displayed first, and | video image is drawn in a series of passes, you get an |
then the even field is displayed to fill in the alternating | entire image drawn at one time. |
gaps left by the odd field to form a single frame. | The progressive scanning method is desirable for dealing |
One frame, displayed every 1/30th of a second, contains | with moving objects. A camera that has the ability to |
two interfaced fields, thus a total of 60 fields are | capture moving objects is called a "full frame shutter |
1Connect the FM antenna supplied to the FM 75Ω COAXIAL terminal as a temporary measure.
2Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
1Connect the AM loop antenna supplied to the AM and terminals.
2If reception is poor, connect an outdoor single
displayed every 1/60th of a second each. | camera". |
The interlaced scanning method is intended for capturing |
|
a still object. |
|
Note • This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that support Progressive Video. (It does not work on TVs with conventional component inputs, i.e.,
•Depending on the brand and model of your TV, this function may not work.
•This unit only outputs 480i and 480p in progressive scan mode.
Cooling Fan | The cooling fan dissipates the heat generated inside the unit so that the unit can be operated | |
normally. The cooling fan is activated automatically to supply cool air to the unit. | ||
| ||
| Please observe the following cautions for your safety. | |
| • Make sure the unit is | |
| and may damage it. | |
| • Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a | |
| newspaper or cloth, heat may build up inside the unit and fire may result.) |
• If reception is poor, connect an outdoor antenna.
Before attaching a 75Ω coaxial cable (with a standard type connector), disconnect the supplied FM antenna.
17 | 18 |