Samsung HT-DB660 instruction manual To cancel the Rrss setup

Page 30

Setting the RRSS(Rear Reflecting Surround System)

• By setting up the RRSS function just once, the speaker distance, channel level, and rear sound

reflection effect are automatically set and create an optimal listening environment.

• This function works only in DVD/CD mode.

Connect the RRSS

 

2

Place the RRSS

Microphone to the

 

Microphone at the

1 RRSS input jack.

 

listening position.

 

 

 

 

*The following images are for illustrative purposes only and may differ from the actual product.

Auto Sound Calibration

Microphone

3

 

Press the RRSS

 

button.

 

 

 

When "REMOVE MIC"

4 appears on the display, disconnect the RRSS Microphone.

L: Front Speaker (L)

R: Front Speaker (R)

C: Center Speaker

SW: Subwoofer

LS: Rear Speaker (L)

RS: Rear Speaker (R)

•A speaker tone will be heard once from each speaker in the order of L ➝ C ➝ R ➝ RS ➝ LS ➝ SW, and then the newly set error tone will be heard again from L ➝ R.

•An optimal listening environment will be set up automatically.

•It takes about 3 to 4 minutes to complete the RRSS setup.

To select the RRSS that you have set

Briefly press the RRSS button.

(If you have set the RRSS for the first time according to

Steps 1 to 3 on the previous page)

•Your selection will toggle between "REAR REFLECTING ON" and "REAR REFLECTING OFF" on the display.

•Select "REAR REFLELTING ON" to listen using the RRSS setting and select "REAR REFLECTING OFF" to listen to the disc currently being played in its original setting.

To enable or disable the sound logo

When you turn on the power, a sound logo will be heard, indicating that the disc reading is completed and the player is in its optimal condition to play the disc.

1.Press and hold the RRSS button.

•"S.LOGO ON" or "S.LOGO OFF" appears on the display.

2.Briefly press the RRSS button.

•Each time you press the button, your selection toggles between "S.LOGO ON" and "S.LOGO OFF".

•Select "S.LOGO ON" to enable the sound logo and select "S.LOGO OFF" to disable the sound logo.

SETUP

Tone Output

A piano sound will be heard and the

setup will be completed.

Note

To check the RRSS that you have set

1. Press and hold the RRSS button twice.

• "CHECK" appears on the display.

2. Next,briefly press the RRSS button.

• The speaker distance and level value for each channel

will be displayed.

Caution

•If the system is installed at a location where sound cannot be reflected (e.g., an open space without walls), the speaker distance, channel level, and rear sound reflection effect may be set incorrectly during the RRSS setup.

•The RRSS button works as the RRSS setup function shown above if the RRSS Microphone is connected, and works as the rear sound reflection effect function if the microphone is removed.

•If you are installing the system for the first time or if you have initialized the system, "NO MEASURED DATA" will appear on the display when you press the RRSS button without connecting the RRSS Microphone.

•During the RRSS setup, the output volume of the tone is fixed and you cannot use the volume control buttons to adjust the output level.

•If you remove the RRSS Microphone during the RRSS setup, the setup will be cancelled.

•Place the front and left speakers (L/R) toward the side walls so that the rear speaker sound is reflected against the walls.

57

To cancel the RRSS setup

Press the RRSS button.

•The tone output stops, "CANCEL" appears on the display, followed by "REMOVE MIC", and then the setup will be cancelled.

58

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Digital Home Theater System Valley Road, Suite Mount Arlington, NJ SamsungSafety Warnings Precautions Class 1 Laser ProductSafety Instructions Water and MoistureFeatures ContentsDisc Size Max. Playing Time Copy ProtectionMark Logo Disc TypeDescription Front PanelInsert Remote Batteries Remove the battery Insert two 1.5V AAAReplace the battery CoverFront/Rear Speakers L R / LS RS Connecting the SpeakersPosition of the DVD Player Center Speaker CVideo Better Quality Screws B as shown in the illustrationComposite Video Good Quality Component Video Best QualityAmmw antenna connection Connecting the AntennasPlease observe the following cautions for your safety Hold the P.SCAN button down for longer than 1 secondPress AUX on the remote control to select AUX 1 or AUX Connecting an External Digital ComponentConnecting an External Analog Component Connect Video Out on the DVD player to Video In on the TVPower cord into Power supplyPress the Mode button so Main unit to select DVD/CD modeTo stop playback Press Stop during playback Disc PlaybackPress Disc Skip button Playback starts automaticallyPress the Remain button Displaying Disc InformationPress Info button Each time the Remain button is pressedPress and hold Fast/Slow PlaybackSkipping Scenes/Songs Press Slow buttonPress Info button twice Repeat PlaybackPress Repeat button Press CursorPress Zoom Angle FunctionZoom Function ButtonChapter display 1Press Info button twice1Press Info button Press Info button Press Cursor Button to move to TwiceUsing Disc Menu Using the Title MenuButton to select Setting the Language‘Setup’ and then Button to selectPress Enter button Setting TV Screen typeAdjusting the TV Aspect Ratio Screen Size 43LBButton to move to ‘Setup’ and thenEnter the password ‘PARENTAL’ and thenPress Cursor Button to move to Press Menu button Setting the PasswordEnter the password Button Enter buttonDuring playback, press Setting the Wallpaper Jpeg DVD VCDButton ‘Setup’ and then Press Logo Press CursorPress Enter button Press Cursor Setting the Speaker Mode Setting the Test ToneSpeaker ‘Audio’ and thenPress Cursor button Setting the Delay Time3to move to ‘DELAY TIME’ and then press Enter button Press Cursor buttonPress Sound Setting the Audio QualityYou can adjust the balance and level for each speaker Edit button and then press CursorTo adjust the ‘DRC’.Press Cursor Press Menu Press Cursor Button to move to ‘Audio’ and thenDolby Pro Logic II Mode Press PL II ModePL II Effect button To cancel the Rrss setup To cancel the rear Live Surround ModeWhat is RRSS? To cancel the magic sound fieldSuper SuperVirtual Headphone Band button Listening to Radio Presetting StationsRemote Control Unit Press Tuner Main UnitPress Sleep button To confirm the sleep timer setting, press Sleep buttonConvenient Functions Press Dimmer buttonWhen operating the TV with the remote control Corresponding to your brand of TVTV Brand Code Number Before Calling for Service Disc Storage SpecificationsHandling discs Handling and Storing DiscsSubtitle languages Be chosen from the menu displayed on the TV monitorDVD player, the player cannot play the disc Movies, these movies are numbered as Title 1, Title 2, etc

HT-DB660 specifications

The Samsung HT-DB660 is a sophisticated home theater system that combines aesthetics, functionality, and advanced technology to deliver an immersive audio-visual experience. Designed for cinephiles and music enthusiasts alike, the HT-DB660 is an all-in-one entertainment solution that incorporates a DVD player, a powerful amplifier, and a high-quality speaker set.

One of the standout features of the Samsung HT-DB660 is its impressive sound performance. The system includes a 5.1-channel surround sound configuration, which consists of five satellite speakers and a robust subwoofer. This setup enables users to experience rich, full-range audio that enhances the enjoyment of movies and music. The system is equipped with Dolby Digital technology, ensuring that sound is accurately processed and delivered for a truly cinematic experience. Additionally, the DTS decoding capability further enriches the audio quality, providing clarity and depth that brings content to life.

In terms of connectivity, the HT-DB660 offers various options to meet different user needs. It includes multiple HDMI inputs, allowing users to seamlessly connect their gaming consoles, Blu-ray players, or streaming devices. The HDMI interface not only supports digital video and audio transmission but also simplifies the connection process by reducing cable clutter. Furthermore, the system features USB input, enabling users to play their favorite media files directly from USB drives, enhancing convenience and versatility.

The Samsung HT-DB660 is also designed with ease of use in mind. The intuitive on-screen menu guides users through setup and allows easy navigation of settings and features. It supports various media formats, including DVDs, CDs, and MP3 files, making it a versatile choice for entertainment. The system's sleek, modern design fits seamlessly into any home decor, and its compact form factor makes it easy to integrate into existing setups without sacrificing style.

Another significant characteristic of the HT-DB660 is its energy-efficient design. The system is built to consume less power without compromising performance, making it an environmentally friendly choice for consumers who are conscious of their energy usage.

In summary, the Samsung HT-DB660 home theater system is a powerful, versatile, and user-friendly option for anyone looking to elevate their home entertainment experience. From its immersive surround sound capabilities to its convenient connectivity options, the HT-DB660 offers a comprehensive solution for enjoying movies and music at home.
Top Page Image Contents