In this window, under ‘General Properties’ enter:
Name: SNWL_Bob
IP Address: 80.62.91.20
Next click ‘Topology’ on the left hand side.
On the ‘Topology’ page, under the ‘VPN Domain’ section select ‘Manually defined’ and select the previously created “Network_Bob” Network Object with the dropdown menu. Click on ‘OK’ to finish.
Now all the Network Addresses are created which will be needed to setup the VPN SA on the Checkpoint NGAI unit. Next, define the VPN. From the top menu, select ‘Manage’ and then ‘VPN Communities…’; the ‘VPN Communities’ window will appear.
18