Name: checkpoint_lan | Name: Side_Alice_lan |
Zone Assignment: VPN | Zone Assignment: VPN |
Type: Network | Type: Network |
Network: 192.168.170.0 | Network: 180.10.10.0 |
Netmask: 255.255.255.0 | Netmask: 255.255.255.0 |
Click ‘OK’ to finish. | Click ‘OK’ to finish. |
Next create an address object group for the two checkpoint address objects. On the ‘Network > Address Objects’ page in the ‘Address Groups’ section, click on ‘Add Group…’ to create the address group for the objects. The ‘Name;" is "checkpoint_group"
Select the "checkpoint_lan" object and ‘Ctrl’ or ‘Shift’ click to select the "Side_Alice_lan" object. Click the right arrow button to add both objects to the group.
From the navigation bar on the left, click on ‘VPN’, this will bring up the ‘VPN > Settings’ page. In the ‘VPN Global Settings’ section, make sure the ‘Enable VPN’ radio button is selected. In the ‘VPN Policies’ section, click on ‘Add’ to create the new VPN policy for the Check Point
8