Samsung HT-TX250 Setting the Test Tone, Setting the Audio, Press the Test Tone button

Settings (Con’t)

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

1 In Stop mode, press the MENU button.

2 Press the Cursor button to move to <Audio> and then press the ENTER button. 3 Press the Cursor button to move to <TEST TONE> and then press the

ENTER button.

MOVE ENTER RETURN EXIT	The test tone will be sent to L ➝ C ➝ R ➝ SR ➝ SL ➝ SW in order.
	If the ENTER button is pressed again at this time, the test tone will stop.

Press the RETURN button to return to the previous level.

Press the EXIT button to exit the setup screen.

STOPEXIT

Alternative method: press the TEST TONE button on the remote.

ENG

Setting the Audio

You can adjust the balance and level for each speaker.

	1	In Stop mode, press the MENU button.
	2	Press the Cursor	button to move to <Audio> and then press the ENTER button.
	3	Press the Cursor	button to move to <SOUND EDIT> and then press the
		ENTER button.
MOVE ENTER RETURN EXIT	4	Press the Cursor	, button to select and adjust the desired item.
		Press the Cursor	, button to adjust the settings.

Press the RETURN button to return to the previous level.

Press the EXIT button to exit the setup screen.

MOVE CHANGE RETURN EXIT

Manually Adjusting the Speaker Volume and Balance with the SOUND EDIT Button.

Press the SOUND EDIT button and then press the Cursor , button.

Multi-Channel Pro Logic Mode

Start

L: Front Speaker (L)	C: Center Speaker	SW: Subwoofer
R: Front Speaker (R)	SL: Rear Speaker (L)	SR: Rear Speaker (R)

Press the TEST TONE button.

■Test tone will be produced as follows:

When playing a DVD or CD, this will work only in Stop mode.

■Use this function to check that each speaker is correctly connected and that there is no problem.

■When HDMI AUDIO is on (audio is produced through TV speakers), the TEST TONE function is not available.

To end the test tone, press the TEST TONE button again.

SETUP

Adjusting Front/Rear Speaker Balance

•You can select between 0, -6, and OFF.

•The volume decreases as you move closer to –6.

Adjusting Center/Rear/Subwoofer Speaker Level

•The volume level can be adjusted in steps from +6dB to –6dB.

•The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

50 51