SUPER MICRO Computer x7slm-l user manual PC Health Monitoring, Power Confi guration Settings

Page 18

X7SLM-L User’s Manual

1-3 PC Health Monitoring

This section describes the PC health monitoring features of the X7SLM-L. The motherboard has an onboard System Hardware Monitor chip that supports PC health monitoring.

Recovery from AC Power Loss

BIOS provides a setting for you to determine how the system will respond when AC power is lost and then restored to the system. You can choose for the system to remain powered off (in which case you must hit the power switch to turn it back on) or for it to automatically return to a power on state. See the Power Lost Control setting in the BIOS chapter of this manual to change this setting. The default set- ting is Last State.

Onboard Voltage Monitoring

The onboard voltage monitor will scan the following voltages continuously: CPU Cores, Chipset Voltage, Memory Voltage (+1.8V), +3.3V, +3.3V standby, +5V, +5V Standby, +12V, -12V and Vbat. Once a voltage becomes unstable, it will give a warning or send an error message to the screen. The User can adjust the voltage thresholds to defi ne the sensitivity of the voltage monitor by using SD III.

Fan Status Monitor with Software

The PC health monitor can check the RPM status of the cooling fans via Supero Doctor III.

CPU Overheat LED and Control

This feature is available when the user enables the CPU overheat warning function in the BIOS. This allows the user to defi ne an overheat temperature. When this temperature reaches the pre-defi ned threshold, the CPU thermal trip feature will be activated and it will send a signal to the Speaker LED and, at the same time, the CPU speed will be decreased.

1-4 Power Confi guration Settings

This section describes features of your motherboard that deal with power and power settings.

1-10

Image 18
Contents X7SLM-L Page About This Manual About This Motherboard Manual OrganizationConventions Used in the Manual Page Europe Contacting SupermicroHeadquarters Asia-Pacifi cTable of Contents Troubleshooting Appendix a Post Error Beep Codes Checklist OverviewX7SLM-L Image X7SLM-L Motherboard LayoutX7SLM-L Quick Reference Not drawn to scaleLED Indicator Label Description Motherboard Features Onboard I/O Acpi FeaturesDimensions OtherX7SLM-L Block Diagram FSB 800/533MHzChipset Overview Graphics Memory Controller Hub GmchIntel I/O Controller Hub 7R ICH7R Power Confi guration Settings PC Health MonitoringBios Support for USB Keyboard Power SupplySlow Blinking LED for Suspend-State Indicator Main Switch Override MechanismSuper I/O Precautions Static-Sensitive DevicesUnpacking Motherboard Installation Tools NeededLocation of Mounting Holes Installation Instructions Processor and Heatsink Installation Installing the LGA775 ProcessorPage Page Page Installing a Passive CPU Heatsink Removing the Heatsink Installing and Removing DIMMs Installing DDR2 MemoryDimm Installation Memory SupportDDR2 Slot To RemoveConnectors/I/O Ports Back Panel Connectors and I/O PortsATX PS/2 Keyboard and PS/2 Mouse Ports MouseKeyboard Universal Serial Bus USB Defi nitionsSerial Ports Video Connector Ethernet Ports LAN Ports Pin Defi nitionJF1 Header Pins Front Control PanelPower LED Front Control Panel Pin Defi nitionsNMI Button NIC1/NIC2 LED Indicators HDD LEDPower Fail LED Overheat OH/Fan Fail LEDReset Button Power ButtonConnecting Cables Pin Auxiliary Power ConnectorExternal Power Connector 12V 4-Pin External Power Connector Pin Defi nitionsFan Headers Fan Header Pin Defi nitionsPower LED/Speaker Internal SpeakerOverheat/Fan Fail LED JOH1 Chassis IntrusionJumper Settings LAN Port Enable/DisableExplanation of Jumpers Watch Dog Enable/Disable Cmos ClearOnboard Indicators Onboard Power LEDSata Connectors Serial ATA and HDD ConnectionsIDE Connector No Power Troubleshooting ProceduresBefore Power On No VideoTechnical Support Procedures Memory ErrorsLosing the System’s Setup Confi guration Frequently Asked Questions Question How do I update my BIOS?Question What type of memory does my motherboard support? Returning Merchandise for Service Question Where do I get drivers for PXE support?Question Whats on the CD that came with my motherboard? Starting Bios Setup Utility How To Change the Confi guration DataIntroduction Main Setup Starting the Setup UtilitySystem Time/System Date System Memory Advanced Setup Confi gurations ΥBIOS FeaturesΥACPI Confi guration ΥProcessor & Clock Options ΥAdvanced Chipset Settings ΥNorthBridge Confi gurationΥVideo Function Confi guration USB Functions USB 2.0 ControllerΥUSB Confi guration ATA/IDE Confi guration ΥIDE Confi guration SubmenuFloppy a Confi gure Sata asType LBA/Large ModePIO Mode Block Multi-Sector TransferDMA Mode A.R.T. For Hard disk drivesBit Data Transfer ΥPCI/PnP Confi guration ΥSuper IO Confi guration ΥHardware Health Confi gurationRemote Access ΥRemote Access Confi gurationCPU Temperature System Temperature Fan Speed Control Modes Serial Port ModeSecurity Settings Access Change User Password Change Supervisor PasswordUser Access Level Clear User PasswordΥHard Disk Drives Boot Confi gurationΥBoot Device Priority ΥRemovable DrivesExit Options ΥCD/DVD DrivesLoad Fail-Safe Defaults Appendix a Post Error Beep Codes Recoverable Post Error Beep CodesPage Appendix B Installing the Windows OS Page Installing Drivers Driver/Tool Installation Display ScreenConfi guring Supero Doctor Supero Doctor III Interface Display Screen-II Remote Control

x7slm-l specifications

Super Micro Computer Inc., commonly known as Supermicro, has been a prominent player in the server and high-performance computing markets. Among its extensive product range, the X7SLM-L motherboard stands out as an ideal solution for both server and workstation applications. Equipped with cutting-edge technology, the X7SLM-L caters to a variety of user demands, including scalability, reliability, and compatibility.

The Supermicro X7SLM-L motherboard is built on an Intel Socket 775 platform, offering support for multi-core Intel processors, including the Xeon series. This enables users to harness the processing power necessary for demanding applications like virtualization, database management, and scientific computations. The board can accommodate up to 8 GB of DDR2 memory, which is essential for memory-intensive tasks, ensuring smooth and efficient performance.

One of the standout features of the X7SLM-L is its support for PCI Express 2.0, allowing for enhanced graphics and expansion capabilities. Users can easily integrate high-performance add-on cards, which are crucial for fields such as video editing, gaming, and CAD applications. Furthermore, the motherboard comes with multiple SATA ports, offering exceptional flexibility for storage configurations. With support for RAID levels 0, 1, 5, and 10, users can ensure data protection and improve performance.

Another important characteristic of the X7SLM-L is its embedded network controller, which provides high-speed connectivity options to meet the needs of data center environments. With integrated dual Gigabit Ethernet, users can take advantage of redundancy and load balancing, crucial for maintaining uptime in critical applications.

Supermicro's commitment to energy efficiency is also evident in the X7SLM-L design. The motherboard supports Intel’s SpeedStep technology, providing dynamic adjustment of CPU voltage and frequency according to workload requirements, thus reducing power consumption and heat generation.

In summary, the Supermicro X7SLM-L motherboard is a versatile and feature-rich platform designed for users who require high performance and reliability. With support for advanced Intel processors, substantial memory capacity, flexible storage options, and energy-efficient technologies, the X7SLM-L stands as an excellent choice for a wide range of computing applications. Whether for server deployments or demanding workstation tasks, this motherboard provides a solid foundation for next-generation computing needs.