SMSC EZ Card 10 manual Setting Up a New Configuration, Figure C-3. Set Up New Configuration Menu

Page 22

CONFIGURATION AND DIAGNOSTICS

Setting Up a New Configuration

If your computer complies with PCI BIOS standards, the system will automatically allocate the necessary I/O, IRQ and boot ROM address resources to the card. Although the SETUP program will not allow you to change the resources which are allocated by the PCI BIOS, it will allow you to change the following settings to suit your requirements:

•Media type

•Full-duplex mode

•Boot ROM size

Figure C-3. Set Up New Configuration Menu

C-4

Image 22

Contents EZ Card SMC’S EZ Card Trademarks About this Guide Order Number DescriptionPackage Contents Table of Contents List of Figures Glossary Index Limited Warranty CompliancesList of Tables Features Chapter IntroductionLAN Connectors Hardware DescriptionLED Indicators Link Status LkActivity Status ACT Select an available expansion slot and plug in the card Chapter Installing the CardPower off your PC and remove its cover Connect your card to the networkPower on the PC Install the driverAppendix a Specifications GeneralEMC/Safety Compliances Operating EnvironmentNetwork Drivers Appendix B PIN Assignments RJ-45 ConnectorTable B.1. RJ-45 Connector Pin Assignments Pin Number AssignmentAUI Pin Assignments Circuit Signal Name AUI ConnectorTable B.2. AUI Connector Pin Assignments Appendix C Configuration Diagnostics Running the Setup Program Figure C-1. Main MenuViewing the Current Configuration Figure C-2. Current Configuration DisplaySetting Up a New Configuration Figure C-3. Set Up New Configuration MenuBoot ROM Size Full-Duplex ModeMedia Type Testing the Card Running the DiagnosticsEeprom Test Testing the Network Connection Configuring the Card Older PCI Computers Configuration and Diagnostics Appendix D Glossary Shielded Twisted-Pair Cable STP Star TopologyTopology PCI Local BusSymbols IndexA-1 Limited Warranty Standard Microsystems Corporation Arkay Drive Hauppauge, NY FCC Class B CompliancesCdoc Class B EC Conformity Vcci Class B Australia AS/NZS 3548Printed on recycled paper

EZ Card 10 specifications

The SMSC EZ Card 10 represents a significant advancement in the realm of high-performance networking solutions. Targeted primarily toward embedded applications, this versatile Ethernet controller provides seamless connectivity options across various digital devices. One of the key features of the EZ Card 10 is its support for 10/100 Mbps data rates, enabling efficient data transmission suited for both legacy and contemporary systems. This flexibility allows devices to maintain compatibility while benefiting from improved network speeds.

Another prominent characteristic of the SMSC EZ Card 10 is its built-in Ethernet MAC and PHY. This integration simplifies the design process for developers, as they can achieve a compact and efficient solution without requiring external components. The controller is designed to comply with the IEEE 802.3 standard, ensuring reliable operation on standard Ethernet networks. Moreover, the EZ Card 10 supports a wide range of operating voltages, which adds to its versatility in varying application environments.

From a technological standpoint, the EZ Card 10 features an advanced FIFO architecture that optimizes packet processing. It efficiently manages data flow, reducing the likelihood of data collisions and enhancing overall performance. The controller also incorporates multiple modes of operation, including promiscuous mode for enhanced data packet sniffing and analysis.

For developers, the SMSC EZ Card 10 provides easy integration with existing systems. It supports both PCI and ISA bus architectures, making it compatible with a variety of motherboard designs. The development tools supplied with the controller, alongside comprehensive documentation, aid engineers in quickly deploying the device across different applications.

In terms of power consumption, the EZ Card 10 is engineered for low power operation, which is essential for portable and battery-powered devices. This energy-efficient design does not compromise on performance, ensuring that devices still deliver robust connectivity without draining resources.

In conclusion, the SMSC EZ Card 10 stands out as an innovative Ethernet controller that balances performance, versatility, and ease of integration. Its array of features, from comprehensive network support to low power consumption, makes it a suitable choice for developers looking to enhance connectivity in embedded systems and various digital applications.