SMSC EZ Card 10 manual Configuring the Card Older PCI Computers

Page 26

CONFIGURATION AND DIAGNOSTICS

Configuring the Card in

Older PCI Computers

The card is configured using the host PCI computer's BIOS setup program. This is done by changing the computer's BIOS settings. The procedure to do this and the terminology used depend on the the BIOS you are using.

For example, if your computer uses the Phoenix BIOS, there is a Device Select field where you are to input the number of the PCI slot where the adapter is installed (e.g., Slot 3 Device). Select “Enabled” for the Enable Device field and assign an IRQ number (the card's IRQ setting is mapped to the BIOS IRQ setup of the host PCI computer).

Set the Trigger/Routing field to select the Trigger method by which the IRQ is assigned or routed to the PCI slot. There are three types of settings to choose from:

•Level/Auto — This is usually the default. Choosing this option leaves the assigned IRQ free for other uses if the installed card does not use it.

•Level/Forced — If you are not able get the PCI card to work properly, choose this option. This will assign the spec- ified IRQ permanently to the card.

•Edge/Auto — Some PCI cards support this option. Do not use it with SMC’s EZ Card 10 PCI models.

Notes: These PCI cards can only function with the EMM386.exe memory manager program, version 4.49 or later. You can verify the version number by entering “EMM386” at the DOS prompt.

Do not specify the HIGHSCAN option with the EMM386.exe statement in your config.sys file or your system will hang.

If you run MEMMAKER and select Custom Setup, do not specify “Aggressively scan upper memory,” or it will

C-8

Page 25 Page 27
Image 26
Page 25 Page 27
Contents EZ Card SMC’S EZ Card Trademarks About this Guide Order Number DescriptionPackage Contents Table of Contents List of Tables Glossary Index Limited Warranty CompliancesList of Figures Features Chapter IntroductionLAN Connectors Hardware DescriptionLED Indicators Link Status LkActivity Status ACT Select an available expansion slot and plug in the card Chapter Installing the CardPower off your PC and remove its cover Connect your card to the networkPower on the PC Install the driverAppendix a Specifications GeneralEMC/Safety Compliances Operating EnvironmentNetwork Drivers Appendix B PIN Assignments RJ-45 ConnectorTable B.1. RJ-45 Connector Pin Assignments Pin Number AssignmentTable B.2. AUI Connector Pin Assignments AUI ConnectorAUI Pin Assignments Circuit Signal Name Appendix C Configuration Diagnostics Running the Setup Program Figure C-1. Main MenuViewing the Current Configuration Figure C-2. Current Configuration DisplaySetting Up a New Configuration Figure C-3. Set Up New Configuration MenuMedia Type Full-Duplex ModeBoot ROM Size Eeprom Test Running the DiagnosticsTesting the Card Testing the Network Connection Configuring the Card Older PCI Computers Configuration and Diagnostics Appendix D Glossary Shielded Twisted-Pair Cable STP Star TopologyTopology PCI Local BusSymbols IndexA-1 Limited Warranty Standard Microsystems Corporation Arkay Drive Hauppauge, NY Cdoc Class B CompliancesFCC Class B EC Conformity Vcci Class B Australia AS/NZS 3548Printed on recycled paper

EZ Card 10 specifications

The SMSC EZ Card 10 represents a significant advancement in the realm of high-performance networking solutions. Targeted primarily toward embedded applications, this versatile Ethernet controller provides seamless connectivity options across various digital devices. One of the key features of the EZ Card 10 is its support for 10/100 Mbps data rates, enabling efficient data transmission suited for both legacy and contemporary systems. This flexibility allows devices to maintain compatibility while benefiting from improved network speeds.

Another prominent characteristic of the SMSC EZ Card 10 is its built-in Ethernet MAC and PHY. This integration simplifies the design process for developers, as they can achieve a compact and efficient solution without requiring external components. The controller is designed to comply with the IEEE 802.3 standard, ensuring reliable operation on standard Ethernet networks. Moreover, the EZ Card 10 supports a wide range of operating voltages, which adds to its versatility in varying application environments.

From a technological standpoint, the EZ Card 10 features an advanced FIFO architecture that optimizes packet processing. It efficiently manages data flow, reducing the likelihood of data collisions and enhancing overall performance. The controller also incorporates multiple modes of operation, including promiscuous mode for enhanced data packet sniffing and analysis.

For developers, the SMSC EZ Card 10 provides easy integration with existing systems. It supports both PCI and ISA bus architectures, making it compatible with a variety of motherboard designs. The development tools supplied with the controller, alongside comprehensive documentation, aid engineers in quickly deploying the device across different applications.

In terms of power consumption, the EZ Card 10 is engineered for low power operation, which is essential for portable and battery-powered devices. This energy-efficient design does not compromise on performance, ensuring that devices still deliver robust connectivity without draining resources.

In conclusion, the SMSC EZ Card 10 stands out as an innovative Ethernet controller that balances performance, versatility, and ease of integration. Its array of features, from comprehensive network support to low power consumption, makes it a suitable choice for developers looking to enhance connectivity in embedded systems and various digital applications.
Top Page Image Contents