5.WAN Network Mode - The second WAN network mode screen configures your WAN settings for the selection you made in the previous screen.
Static IP
The Setup Wizard screen should display:
WAN Network Mode: NAT Enabled (Static IP)
SonicWALL | Enter a single, static IP address. This must be |
WAN IP | in the address range assigned to you by |
Address | your ISP. |
|
|
WAN Subnet | Enter the subnet mask for your network, |
Mask | provided by your ISP. |
| For example, 255.255.255.0. |
|
|
Gateway | Enter the IP address of your Internet gateway, |
(Router) | provided by your ISP. |
Address |
|
|
|
DNS Server | Enter the IP address of the DNS server for your |
Address | network, provided by your ISP. |
|
|
DNS Server | You can enter a secondary, |
Address #2 | server to use if the first one fails. |
(optional) |
|
|
|
Click Next.
DHCP
The Setup Wizard screen should display:
WAN Network Mode: NAT with DHCP Client
If you selected DHCP, you do not need to enter any WAN networking settings. The network settings are provisioned automatically from a DHCP server.
Click Next.
SonicWALL TZ 150 Wireless Getting Started Guide | Page 11 |