SonicWALL manual Applying Power to SonicWALLTZ 150 Wireless

Page 5

Applying Power to the

2SonicWALLTZ 150 Wireless

1.Plug the power supply into the back of the security appliance and into an appropriate power outlet.

Warning: Only use a SonicWALL-approved 12V, 1.66A power supply.

The Power LED on the front panel lights up green when you plug in the SonicWALL TZ 150 Wireless. The Test LED lights up and may blink while the appliance performs a series of diagnostic tests. When the Test LED is no longer lit, the security appliance is ready for configuration.

If the Test LED remains lit after the SonicWALL TZ 150 Wireless has booted, disconnect the power to the security appliance for a few seconds and plug it back in to restart the unit.

Note: For more trouble shooting information, refer to the SonicOS Standard 3.0 Administrator’s Guide.

Page 4

Image 5

Contents Getting Started Guide Any Items Missing? Check Package ContentsBefore You Begin What You Need to Begin SonicWALLTZ 150 Wireless ConfigurationOther Information Internet Service Provider ISP InformationCollecting Required Information Applying Power to SonicWALLTZ 150 Wireless Connect the WAN Cable Connecting SonicWALLTZ 150 WirelessConnecting the Ethernet Cables Connect the LAN Cable Accessing the Management InterfaceEnter 192.168.168.168 in the Location or Address field If the SonicWALL Setup Wizard Does Not AppearUsing the SonicWALL Setup Wizard Select Office Gateway and click Next See Procedure 1, Collecting Required Information on WAN Network Mode NAT with Dhcp Client WAN Network Mode NAT Enabled Static IPWAN Network Mode NAT with Pptp Client WAN Network Mode NAT with PPPoE ClientWAN Ssid SonicWALL TZ 150 Wireless Getting Started Guide Click Next Testing Your Connection Before You Register Registering Your SonicWALLTZ 150 WirelessSonicWALL TZ 150 Wireless management interface Page Registering Your SonicWALLTZ 150 Wireless Congratulations Connecting to the Wireless Network Connecting Wireless Clients to SonicWALLTZ 150 WirelessOpen the SonicWALL Global VPN Client folder Establishing Secure Wireless ConnectionsLaunch setup.exe SonicWALL TZ 150 Wireless Getting Started Guide Page Configuring Computers for Your Network with Dhcp Connecting Computers to Your SonicWALLTZ 150 WirelessWindows Windows XPWindows NT Open Network and Dial-up ConnectionsStart menu, select Settings and then select Control Panel Mounting SonicWALLTZ 150 Wireless Considerations for Mounting the SonicWALL TZ 150 Wireless SonicWALL TZ 150 Wireless Mounting TemplatePage Cable Connections Power Supply Information Models APL15-03AConsiderations for Mounting the APL15-03A North American Authorized ChannelsGlossary of Networking Terms SonicWALL TZ 150 Wireless Getting Started Guide Trademarks Copyright NoticeSonicWALL, Inc Borregas Avenue Sunnyvale, CA