SMC Networks 100 manual Installing the Switch, Selecting a Site

Page 39

CHAPTER 3 INSTALLING THE SWITCH

Selecting a Site

TigerSwitch 100 units can be mounted in a standard 19-inch equipment rack or on a flat surface. Be sure to follow the guidelines below when choosing a location.

◆The site should:

•be at the center of all the devices you want to link and near a power outlet.

•be able to maintain its temperature within 0° to 50° C and its humidity within 5% to 95%, non-condensing

•provide adequate space (approximately two inches) on all sides for proper air flow

•be accessible for installing, cabling and maintaining the devices

•allow the status LEDs to be clearly visible

◆Make sure twisted-pair cable is always routed away from power lines, fluorescent lighting fixtures and other sources of electrical interference, such as radios, transmitters, etc.

◆Make sure that a separate grounded power outlet that provides 100 to 240 VAC, 50 to 60 Hz, is within 8 feet of each device and is powered from an independent circuit breaker. As with any equipment, using a filter or surge suppressor is recommended.

3-1

Image 39

Contents TigerSwitch Page TigerSwitch Installation Guide Trademarks Limited Warranty Limited Warranty Compliances FCC Class aEC Conformance Declaration Class a Industry Canada Class a Underwriters Laboratories Compliance Statement Safety ComplianceIii Warnhinweis Faseroptikanschlüsse Optische SicherheitWichtige Sicherheitshinweise Germany Table of Contents Making Network Connections Vii Viii Overview Chapter About TigerswitchOptional Modules Switch ArchitectureDescription of Hardware Management Options100BASE-FX VF-45 Ports Port and System LEDs Status LEDsNetwork Management Module Network Management ModuleVLANs Spanning Tree ProtocolOptional 100BASE-FX Module SMC6900FSC Multicast SwitchingOptional Media Extender Modules Traffic PriorityOptional 100BASE-FX Module SMC6900FSSC Optional 1000BASE-SX Module SMC6900GOptional 1000BASE-LX Module SMC6900GLSC Optional Redundant Power Unit SMCRPU150W Optional 1000BASE-T Module SMC6900GTOptional Stack Module SMC6900S 12. Power Supply Receptacles Power Supply ReceptaclesFeatures and Benefits ConnectivityExpandability Management PerformanceAbout the Tigerswitch About the Tigerswitch Chapter Network Planning Introduction to SwitchingCollapsed Backbone Sample ApplicationsCentral Wiring Closet Central Wiring ClosetRemote Connections with Fiber Cable Collapsed Backbone Using Fiber CableMaking Vlan Connections Making Vlan ConnectionsMaximum 1000BASE-SX Fiber Optic Cable Distance Connectivity RulesMbps Gigabit Ethernet Collision Domain Maximum 1000BASE-T Optic Cable DistanceSMC 3-2 Rule for Class II Repeaters Maximum Network Diameter Using RepeatersMbps Fast Ethernet Collision Domain Maximum 100BASE-FX Fiber Optic Cable DistanceMaximum Fast Ethernet Cable Distance Cable Type Connecting Max. DistanceApplication Notes Network Planning Selecting a Site Installing the SwitchEquipment Checklist Package ContentsOptional Rack-Mounting Equipment Rack Mounting MountingAttaching the Brackets Attaching the Adhesive Feet Desktop or Shelf MountingInstalling an Optional Module into the Switch Stacking Installing a ModuleStacking the Switches Power Receptacle Connecting to a Power SourceInstalling the Switch Chapter Making Network Connections Connecting Network DevicesVF-45 Fiber Connections SC Fiber Connections Making SC Port Connections Connecting to PCs, Servers, Hubs and Switches 1000BASE-T Twisted-Pair ConnectionsCabling Guidelines Making Twisted-Pair Connections Wiring Closet Connections Wiring Closet ConnectionsMaking Network Connections Diagnosing Switch Indicators Appendix a TroubleshootingPower and Cooling Problems InstallationIn-Band Access Troubleshooting Troubleshooting Appendix B Cables SpecificationsCables 1000BASE-T Pin Assignments RJ-45 Port and Cable Assignments1000BASE-T Cable Requirements Cable Testing for Existing Category 5 CableAdjusting Existing Category 5 Cabling DB-9 Port Pin Assignments Console Port Pin AssignmentsConsole Port to 9-Pin COM Port on PC Console Port to 25-Pin DCE Port on ModemConsole Port to 25-Pin DTE Port on PC Cables Physical Characteristics Appendix C SpecificationsPower Consumption WeightTemperature Power SupplySwitch Features Management Features Warranty StandardsCompliances Slide-in Module 100BASE-FX Extender Module1000BASE-SX Extender Module 1000BASE-T Extender Module 1000BASE-LX Extender ModuleConnector Interface Agent ModuleStack Module Appendix D Ordering Information Ordering Information Auto-Negotiation GlossaryGlossary-1 1000BASE-TGlossary-2 Glossary-3 Glossary-4 Glossary-5 Glossary-6 Transmission Control Protocol/Internet Protocol TCP/IPVirtual LAN Vlan Index-1 IndexIndex-2 See RPU Index-3Index-4 Page Internet