Wireless System Set-Up

ENGLISH

SET-UP

To configure the P2T TransMixer and P2R Receiver for wireless operation:

1.	Plug the power supply into the DC INPUT connector on the		5.	To pass audio signal directly through the TransMixer, use
	rear panel of the P2T, then plug it into a power outlet.			the corresponding SPLIT OUT connector on the rear panel
2.	Connect audio sources to the combo XLR/1/ -inch jacks on			of the device.
	the front panel.	4	6.	Turn the On/Off/Volume knob on the P2R clockwise past click
	the front panel.		6.	Turn the On/Off/Volume knob on the P2R clockwise past click
3.	Select a frequency channel (1-8). See the Selecting a Fre-			(On). Leave the volume setting low.
	quency Channel section on page 6 for details.		7.	Set the P2R to the same frequency channel as the P2T.
	IMPORTANT: Never set more than ONE		8.	Check the RF LED on the P2R to confirm that transmission
	TransMixer to the same frequency channel, or			is being received.
	interference will occur.		9.	Plug earphones into the earphone output jack. Insert the
4.	Observe the signal/clip LEDs. If they are consistently			earphones into your ears as instructed in the earphone
	red, decrease the level with the corresponding INPUT			user’s guide.
	level knob.		10.	Slowly increase the P2R volume to a comfortable level.

PSM200 TransMixer

MIC/LINE1

MIC/LINE2

INPUTS

CHANNEL

SELECT

Mixing Console

Hybrid Wired/Wireless System Set-Up

To configure the P2T TransMixer and P2R Receiver for hybrid wired/wireless operation:

1. Follow steps 1-9 of the Wireless System Set-Up section.

4. Attach the P2R onto your belt, waistband, or another location.

2.Connect an audio source to the 1/4-inch MIX IN jack on the side of the P2R.

3.Set the GAIN switch to LO initially and set the source volume to a moderate level.

5.Slide the audio cable or earphone cord into the cable man- agement groove.

6.Slowly increase the P2R volume to a comfortable level. Set the GAIN switch to HI if you need more level.

P2R Stand-Alone Wired Set-Up*

To configure the P2R Receiver as a stand-alone personal monitor:

1.Turn the On/Off/Volume knob clockwise past click (On). Leave the volume setting low.

2.Set the CHANNEL to “A” with the SELECT Button. See the

Wired Mode section on page 8 for details.

3.Connect an audio source to the 1/4-inch MIX IN jack on the side of the P2R.

4. Set the GAIN switch to LO initially and set the source	Mixing Console
volume to a moderate level.

5. Attach the P2R onto your belt, waistband, or another location.

6.Slide the audio cable or earphone cord into the cable management groove.

7.Plug the earphones into the earphone output jack. Insert

the earphones into your ears as instructed in the ear- phone user’s guide.

8.Slowly increase the P2R volume to a comfortable level. Set the GAIN switch to HI if you need more level.

NOTE: Setting the P2R receiver to “A” disables its wireless capability and extends the battery life.

*If you have purchased the P2R as a stand-alone personal monitor, you can go wireless by simply purchasing a P2T TransMixer.

PSM200 specifications

The Shure PSM200 is a professional in-ear monitoring system designed to enhance the performance experience for musicians, sound engineers, and performers. This versatile system provides high-quality audio transmission, allowing users to receive an exceptional mix of sound directly into their ears. The PSM200 is ideal for both on-stage performances and studio environments, offering reliable wireless monitoring with user-friendly features.

One of the main features of the Shure PSM200 is its dual-channel receiver, which allows for two separate mixes to be delivered to two different performers. This flexibility is particularly beneficial for bands and groups that require individualized sound levels and content. The PSM200 system operates across a wide frequency range, ensuring clear and consistent audio quality even in crowded environments. With a selection of frequencies to choose from, users can easily find an open channel, minimizing the risk of interference.

The PSM200 is equipped with advanced technologies that enhance its performance. One notable technology is the "Smart Frequency" feature, which enables the system to identify and select the best frequency for transmission automatically. This intelligent frequency management helps to prevent dropouts and signal degradation, ensuring a stable connection during performances. Additionally, the PSM200 features Shure's renowned audio processing, which delivers high-fidelity sound with minimal latency.

Another significant characteristic of the PSM200 is its ergonomic design. The lightweight bodypack receivers are designed for comfort, making them suitable for prolonged use during long sets. With a robust construction, the receivers can endure the wear and tear of live performances while providing reliable operation.

Furthermore, the PSM200 offers an easy-to-use interface with intuitive controls that allow performers to make quick adjustments on the fly. The system also supports a wide range of earphones and earbuds, ensuring users can find the perfect fit and sound profile for their needs.

In conclusion, the Shure PSM200 in-ear monitoring system stands out for its professional audio quality, advanced technologies, and user-oriented design. Whether for live performances or studio sessions, it provides musicians and performers with the tools necessary to achieve optimal sound and enhance their overall performance experience. With its reliable performance and thoughtful features, the PSM200 is a valuable asset for any serious artist or sound engineer.

SET-UP