Shure PSM200 manual Quick SET-UP Guides, PSMR200 Wireless System

Page 4

ENGLISH

QUICK SET-UP GUIDES

PSMR200 Wireless System

The following set-up illustration is for the complete PSM200 Wireless System, which includes the P2T TransMixer, the P2R Receiver, and the E2 Earphones. If you have purchased the P2R as a stand-alone wired personal monitor, see page 4.

1. Plug in the power supply and connect it to the DC

2. Insert a 9 Volt battery into the P2R Receiver,

input on the rear panel of the P2T TransMixer.

observing proper polarity.

PSM200 TransMixer

MIC/LINE1

MIC/LINE2

1

INPUTS

2

CHANNEL SELECT

Mixing Console

3.

Connect audio sources to the MIC/LINE INPUTS on the front

6.

Check the RF LED on the top of the Receiver to

 

panel of the TransMixer.

 

confirm that it is receiving signal from the TransMixer.

4.

Turn the Receiver volume knob clockwise past the click (ON).

7.

Plug the Earphones into the earphone jack on the

 

Keep the volume at a low setting.

 

Receiver. Insert the Earphones into your ears.

5.

Set the TransMixer and Receiver to the same frequency chan-

8.

Increase Receiver volume until the knob is turned to

 

nel. See the Selecting a Frequency Channel section on page 6.

 

approximately 11 o’clock.

 

 

 

 

PSM200 TransMixer

MIC/LINE1

MIC/LINE2

1

INPUTS

2

CHANNEL

SELECT

Mixing Console

9.On the front panel of the TransMixer, adjust the signal level of each audio input with the INPUT knobs.

10.Check the INPUT LEDs on the TransMixer to verify that signal is present, but not clipping. See the Audio Inputs and Outputs section on page 6 for details.

11.Slowly adjust the Receiver volume to a comfortable level.

3

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PSM DB SPL avoid or hearing damage may occur Table of Contents PSMR200 Wireless System Quick SET-UP GuidesWhen Used as a Wired Stand-Alone Personal Monitor P2R Receiver Quick Set-Up GuideIntroduction FeaturesPSM200 Personal Monitor System Controls and Features Phantom PowerP2T Transmixer Audio Inputs and OutputsP2R Receiver Battery InstallationCable Management Groove Wireless Mode Wired ModeScanner Mode MIX in JackWireless System Set-Up Hybrid Wired/Wireless System Set-UpP2R Stand-Alone Wired Set-Up SET-UPApplication ONE Wireless Set-Up for a Vocalist System ApplicationsInstall Rack Ears Rack Mounting the P2TMount in an Equipment Rack Single UnitAccessories TroubleshootingSpecifications PSM200 Channel Frequencies P2R ReceiverChannel a P2R Only P2R Receiver MIX in Jack Wiring Diagram AppendixCertifications Mono Line InputDeclaration of Conformity EU Declaration of Conformity
Related manuals
Manual 17 pages 40.9 Kb

PSM200 specifications

The Shure PSM200 is a professional in-ear monitoring system designed to enhance the performance experience for musicians, sound engineers, and performers. This versatile system provides high-quality audio transmission, allowing users to receive an exceptional mix of sound directly into their ears. The PSM200 is ideal for both on-stage performances and studio environments, offering reliable wireless monitoring with user-friendly features.

One of the main features of the Shure PSM200 is its dual-channel receiver, which allows for two separate mixes to be delivered to two different performers. This flexibility is particularly beneficial for bands and groups that require individualized sound levels and content. The PSM200 system operates across a wide frequency range, ensuring clear and consistent audio quality even in crowded environments. With a selection of frequencies to choose from, users can easily find an open channel, minimizing the risk of interference.

The PSM200 is equipped with advanced technologies that enhance its performance. One notable technology is the "Smart Frequency" feature, which enables the system to identify and select the best frequency for transmission automatically. This intelligent frequency management helps to prevent dropouts and signal degradation, ensuring a stable connection during performances. Additionally, the PSM200 features Shure's renowned audio processing, which delivers high-fidelity sound with minimal latency.

Another significant characteristic of the PSM200 is its ergonomic design. The lightweight bodypack receivers are designed for comfort, making them suitable for prolonged use during long sets. With a robust construction, the receivers can endure the wear and tear of live performances while providing reliable operation.

Furthermore, the PSM200 offers an easy-to-use interface with intuitive controls that allow performers to make quick adjustments on the fly. The system also supports a wide range of earphones and earbuds, ensuring users can find the perfect fit and sound profile for their needs.

In conclusion, the Shure PSM200 in-ear monitoring system stands out for its professional audio quality, advanced technologies, and user-oriented design. Whether for live performances or studio sessions, it provides musicians and performers with the tools necessary to achieve optimal sound and enhance their overall performance experience. With its reliable performance and thoughtful features, the PSM200 is a valuable asset for any serious artist or sound engineer.
Top Page Image Contents