SMC Networks SMCBGSLCX1, SMCRPS600W*, SMCBGLLCX1 manual Status LEDs, Port and System LEDs

ABOUT THE TIGERSWITCH 10/100

Status LEDs

The LEDs, which are located on the front panel for easy viewing, are shown below and described in the following table.

Figure 1-2. Port and System LEDs

		Port Status LEDs
LED	Condition		Status
Fast Ethernet Ports (Ports 1~48)
Link/Act.*	On/Flashing		Port has established a valid 10 Mbps network
	Amber		connection. Flashing indicates activity.
	On/Flashing		Port has established a valid 100 Mbps network
	Green		connection. Flashing indicates activity.
	Off		There is no valid link on the port.
Gigabit Ethernet Ports (Ports 49~50)
Link/Act.*	On/Flashing		Port has established a valid 10 Mbps or
	Amber		100 Mbps network connection. Flashing
			indicates activity.
	On/Flashing		Port has established a valid 1000 Mbps
	Green		network connection. Flashing indicates
			activity.
	Off		There is no valid link on the port.
FDX*	On Green		Port is operating in full-duplex mode.
(all ports)
	Off		Port is operating in half-duplex mode.

*Use the Mode Select button to select the LED display mode.

1-6