SMC Networks SMCBGSLCX1, SMCRPS600W*, SMCBGLLCX1 Connecting to PCs, Servers, Hubs and Switches

Page 46

MAKING NETWORK CONNECTIONS

Note: If auto-negotiation is disabled for an RJ-45 port, the auto-MDI/ MDI-X pin signal configuration is also disabled.

See Appendix B for further information on cabling.

Caution: Do not plug a phone jack connector into an RJ-45 port. This will damage the switch. Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards.

Connecting to PCs, Servers, Hubs and Switches

1.Attach one end of a twisted-pair cable segment to the device’s RJ-45 connector.

Figure 4-1. Making Twisted-Pair Connections

2.If the device is a network card and the TigerSwitch is in the wiring closet, attach the other end of the cable segment to a modular wall outlet that is connected to the wiring closet (see “Wiring Closet Connections” on the next page). Otherwise, attach the other end to an available port on the switch.

Make sure each twisted pair cable does not exceed 100 meters (328 ft) in length.

Note: When connected to a shared collision domain (such as a hub with multiple workstations), switch ports must be set to half-duplex mode and back pressure flow control disabled.

4-2

Image 46
Contents TigerSwitch 10/100 Page TigerSwitch 10/100 Installation Guide Trademarks Limited Warranty Limited Warranty EC Conformance Declaration Class a CompliancesFCC Class a IiiCompliances Industry Canada Class a Warnhinweis Faseroptikanschlüsse Optische Sicherheit Safety ComplianceUnderwriters Laboratories Compliance Statement Vii Wichtige Sicherheitshinweise GermanyViii Contents Installing the Switch Making Network ConnectionsContents Xii Chapter About Tigerswitch 10/100 OverviewSwitching Method Switch ArchitectureManagement Options Spanning Tree Protocol VLANsMulticast Switching Traffic Priority10BASE-T/100BASE-TX Ports Description of Hardware1000BASE-T/SFP Ports Status LEDs Port and System LEDsSystem Status LEDs Optional Redundant Power Unit Power Supply ReceptaclesFeatures and Benefits ConnectivityPerformance Management About the Tigerswitch 10/100 Introduction to Switching Chapter Network PlanningSample Applications Collapsed BackboneCentral Wiring Closet Central Wiring ClosetCollapsed Backbone Using Fiber Cable Remote Connections with Fiber CableMaking Vlan Connections Making Vlan ConnectionsConnectivity Rules Mbps Gigabit Ethernet Collision DomainSMC 3-2 Rule for Class II Repeaters Mbps Fast Ethernet Collision DomainMaximum Fast Ethernet Cable Distance SMC 2-1 Rule for Class I RepeatersMaximum Ethernet Cable Distance Maximum Network Diameter Using RepeatersMbps Ethernet Collision Domain SMC 5-4-3 RuleApplication Notes Network Planning Installing the Switch Selecting a SitePackage Contents Equipment ChecklistOptional Rack-Mounting Equipment Mounting Rack MountingAttaching the Brackets Desktop or Shelf Mounting Attaching the Adhesive FeetConnecting to a Power Source Power ReceptacleTwisted-Pair Devices Connecting Network DevicesChapter Making Network Connections Cabling GuidelinesConnecting to PCs, Servers, Hubs and Switches Making Twisted-Pair ConnectionsWiring Closet Connections Wiring Closet ConnectionsMaking Network Connections Diagnosing Switch Indicators Appendix a TroubleshootingPower and Cooling Problems Installation In-Band AccessSpecifications Appendix B CablesFigure B-1. RJ-45 Connector Pin Numbers Twisted-Pair Cable and Pin Assignments100BASE-TX/10BASE-T Pin Assignments RJ-45 Pin AssignmentsPin MDI Signal Name MDI-X Signal Name 1000BASE-T Pin AssignmentsAdjusting Existing Category 5 Cabling to Run 1000BASE-T Cable Testing for Existing Category 5 Cable1000BASE-T Cable Requirements DB-9 Port Pin Assignments Console Port Pin AssignmentsConsole Port to 9-Pin COM Port on PC Console Port to 25-Pin DTE Port on PC Cables Appendix C Specifications Physical CharacteristicsPower Consumption TemperaturePower Supply HumiditySwitch Features Management Features StandardsCompliances WarrantySafety CE Mark EmissionsSpecifications Appendix D Ordering Information Ordering Information 1000BASE-T GlossaryGlossary-1 Auto-NegotiationGlossary-2 Glossary-3 Glossary-4 Transmission Control Protocol/Internet Protocol TCP/IP Glossary-5Virtual LAN Vlan Glossary-6 Index Index-1Index-2 Index-3 Index-4 Page For Technical SUPPORT, Call